Author Topic: Stops at Spin Cycle  (Read 2626 times)

Offline dkhesser

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 4
Stops at Spin Cycle
« on: March 09, 2009, 12:12:48 PM »
I have the exact same situation as this topic.

There is a burning odor.

The back pulley (pump I believe) is frozen and the other two turn freely.

Any help is greatly appreciated

Model PAVT454EWW
« Last Edit: March 09, 2009, 01:16:12 PM by Al Capone »

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Re: Stops at Spin Cycle
« Reply #1 on: March 09, 2009, 01:15:32 PM »
Hi,

Please be sure to read, Posting Basics - Starting a New Topic.

Note were it say's towards the bottom.

Quote
Please do not ask your own question in a topic.
In other words, please don't hijack the topic and make it yours.
Start your own topic and reference the other topic related to your issue.

I have made your reply into a new topic and referenced the other topic for you.

Is the model number of your washer the exact same as the one in the Other Topic?

If you have a different model number please post it here.

RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Stops at Spin Cycle
« Reply #2 on: March 09, 2009, 07:26:31 PM »
Tip yer washer back and remove the belt by hand. Turn the pump and see if it is locked up.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline dkhesser

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 4
Re: Stops at Spin Cycle
« Reply #3 on: March 10, 2009, 03:02:38 PM »
Took the belt off.

The back pulley (pump I believe) is frozen and the other two turn freely.

Any help is greatly appreciated

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9374
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Stops at Spin Cycle
« Reply #4 on: March 10, 2009, 03:06:10 PM »
What is the model number of your washer?
Hope you find our site helpful.

Offline dkhesser

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 4
Re: Stops at Spin Cycle
« Reply #5 on: March 10, 2009, 03:13:28 PM »
PAVT454EWW

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Re: Stops at Spin Cycle
« Reply #6 on: March 10, 2009, 03:20:46 PM »
I updated the topic to include the model number information, thanks.

RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9374
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Stops at Spin Cycle
« Reply #7 on: March 10, 2009, 03:24:35 PM »
Took the belt off.

The back pulley (pump I believe) is frozen and the other two turn freely.

Any help is greatly appreciated

The water pump on this model is located left rear corner.

If the pump does not turn you can see if something is caught inside it, but I would guess your going to need to replace the water pump.

Factory Part Number: 21002240

Hope you find our site helpful.

Offline dkhesser

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 4
Re: Stops at Spin Cycle
« Reply #8 on: March 10, 2009, 03:27:04 PM »
Thanks, just ordered one. Good to have the confirmation

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9374
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Stops at Spin Cycle
« Reply #9 on: March 10, 2009, 03:28:06 PM »
 O0

Please keep us updated on how the repair goes.
Hope you find our site helpful.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Stops at Spin Cycle
« Reply #10 on: March 10, 2009, 04:59:40 PM »
Their are 3 bolts holding the pump on. You will need a 3/8Th's socket or nut driver also a pair of pliers to get the squeeze clamps on the hoses off. The pump comes right off easy as pie. If water is in the washer get a bucket and lower the drain hose,let gravity flow as much of it out as you can and then have some towels to catch any water that comes out when you get the drain hose and tub hose off the pump. Easy fix.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Stops at Spin Cycle

Started by djp

Replies: 4
Views: 1486
Last post March 05, 2009, 07:01:36 AM
by djp
GE washer stops mid cycle & wont spin out completely

Started by kstump27

Replies: 2
Views: 7467
Last post July 07, 2009, 06:23:24 AM
by Repair-man
stops at last spin cycle

Started by 4uzindian

Replies: 3
Views: 1649
Last post December 21, 2009, 06:36:27 AM
by Repair-man
cycle stops at spin

Started by frank2

Replies: 18
Views: 4643
Last post January 15, 2011, 08:51:21 PM
by RegUS_PatOff
GE Washer stops right before spin cycle is supposed to start

Started by oldguard

Replies: 5
Views: 3701
Last post May 23, 2011, 09:43:55 AM
by JWWebster
Kenmore washer stops at spin cycle 110.44836300

Started by browniiiz

Replies: 5
Views: 1504
Last post May 03, 2012, 08:13:35 PM
by jumptrout51