Stops at Spin Cycle

[dkhesser]

I have the exact same situation as this topic.

There is a burning odor.

The back pulley (pump I believe) is frozen and the other two turn freely.

Any help is greatly appreciated

Model PAVT454EWW

[Al Capone]

Hi,

Please be sure to read, Posting Basics - Starting a New Topic.

Note were it say's towards the bottom.

Please do not ask your own question in a topic.
In other words, please don't hijack the topic and make it yours.
Start your own topic and reference the other topic related to your issue.

I have made your reply into a new topic and referenced the other topic for you.

Is the model number of your washer the exact same as the one in the Other Topic?

If you have a different model number please post it here.

[JWWebster]

Tip yer washer back and remove the belt by hand. Turn the pump and see if it is locked up.

[dkhesser]

Took the belt off.

The back pulley (pump I believe) is frozen and the other two turn freely.

Any help is greatly appreciated

[AJ]

What is the model number of your washer?

[dkhesser]

PAVT454EWW

[Al Capone]

I updated the topic to include the model number information, thanks.

[AJ]

Took the belt off.

The back pulley (pump I believe) is frozen and the other two turn freely.

Any help is greatly appreciated

The water pump on this model is located left rear corner.

If the pump does not turn you can see if something is caught inside it, but I would guess your going to need to replace the water pump.

Factory Part Number: 21002240

[dkhesser]

Thanks, just ordered one. Good to have the confirmation

[AJ]

 

Please keep us updated on how the repair goes.

[JWWebster]

Their are 3 bolts holding the pump on. You will need a 3/8Th's socket or nut driver also a pair of pliers to get the squeeze clamps on the hoses off. The pump comes right off easy as pie. If water is in the washer get a bucket and lower the drain hose,let gravity flow as much of it out as you can and then have some towels to catch any water that comes out when you get the drain hose and tub hose off the pump. Easy fix.