Author Topic: Maytag Washer is leaking  (Read 2290 times)

Offline vole

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 4
Maytag Washer is leaking
« on: January 25, 2009, 06:14:28 PM »
Your remove the agitator and then there is a nut you just get a small pipe wrench and bump it around till it comes off then the seal will be right there. You get it out replace it with the new seal and replace the nut with a new one that comes in the kit and then put the agitator back. It is pretty simple.

Just going through this myself.

I'm having trouble getting the nut off. One place says it comes off "counter clockwise" and another says it's left hand and comes off "clockwise".

And can I make the replacement without getting the spanner wrench? Assuming I ever get the old one off.

Thanks of any help.

Model LAT2300AA
« Last Edit: January 28, 2009, 06:27:54 AM by Al Capone »

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Maytag Washer is leaking
« Reply #1 on: January 25, 2009, 08:01:52 PM »
Hi,

Please be sure to read Topic: Posting Basics - Starting a New Topic

Note towards the bottom it say's.

Quote
Please do not ask your own question in a topic.
In other words, please don't hijack the topic and make it yours.
Start your own topic and reference the other topic related to your issue.

I have spit your post off into a new topic and made a reference to the topic related to yours. :)

Is your model number the same as the one in the first topic you posted a reply in or do you have a different model number?

Thanks,

RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1318
  • Country: us
    • Buy me a beer through paypal
Re: Maytag Washer is leaking
« Reply #2 on: January 25, 2009, 09:40:09 PM »
If the seal is bad may want to do the bearing as well as it will fail soon. Water over the bearing will separate the lubricant & cause the bearing to fail.

Offline vole

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 4
Re: Maytag Washer is leaking
« Reply #3 on: January 27, 2009, 08:09:04 PM »
If I could, I'd edit the topic subject to put in the model number.

Originally, I added my question to the another topic since I thought it closely related. Big mistake.

Turns out the LAT2300AA is quite different.

To replace the tub seal, the outer tub does not have to be removed. I had followed general instructions and fought with removing heavy springs, hoses, and clamps.

For this model, only the inner tub needs to be removed. Seal lifts off center part of outer tub that forms a vertical tube in the tub. No need to remove the outer tub.

As for replacing the bearing, it's all back together right now. It would have been simple when it I had it apart, but I won't go near those springs again unless I have to. I'm sure there's a way to do it but I did it the hard way.


Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Tub Springs off in 30 seconds
« Reply #4 on: January 27, 2009, 08:45:50 PM »
For those massive tub springs found on many Maytag top-loaders, a simple way to remove them is by taking an ordinary metal switchbox and inserting it between the stretched coils. I do this by flexing the washer tub way over to the front of the machine, removing the right rear spring first. With the box inserted in the coils, the tub can be pushed back toward the spring to unhook it. Leave the box on the spring and use another box to remove the left rear spring. The front spring will remove by hand once the other two are off. Sure makes life easier on a tough job, and saves money from buying expensive spring tools!


"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Maytag Washer is leaking
« Reply #5 on: March 08, 2009, 12:45:49 PM »
Great tip Repair-man, thanks!

 

Maytag Washer Leaking

Started by TechnicianBrian

Replies: 0
Views: 1666
Last post June 06, 2008, 01:58:24 PM
by TechnicianBrian
Maytag Washer is leaking

Started by Floridaguy

Replies: 15
Views: 6739
Last post January 26, 2009, 04:32:17 AM
by Repair-man
LAT9206B0E Maytag Washer Tub is leaking

Started by Floridaguy

Replies: 2
Views: 1620
Last post October 13, 2008, 07:45:00 PM
by Al Capone
Maytag Top Load Washer Leaking

Started by TechnicianBrian

Replies: 3
Views: 5964
Last post November 03, 2008, 08:37:38 PM
by AJ
Maytag Washer leaking/ throwing grease- belt chewed up-

Started by HIGHBERG

Replies: 1
Views: 2299
Last post February 08, 2009, 08:55:12 PM
by theoldstoveguy
Maytag top load washer leaking

Started by hobart007

Replies: 12
Views: 8126
Last post March 11, 2009, 05:15:14 AM
by Repair-man