Author Topic: Kenmore Dryer Model 110.76660100 Heater wires burned  (Read 4343 times)

Offline gwilli

  • VIP Member
  • Member Since: Dec 2007
  • Posts: 1
Kenmore Dryer Model 110.76660100 Heater wires burned
« on: December 17, 2007, 04:46:07 AM »
Got this dryer free from a friend, he wasn't sure what was wrong with it. First, it has the old standard 3 prong plug, my apartment has the outlet for a 4 prong, How should I go about changing the plug out, is it good to do this?
Then the main problem is scorched/burned wires. The heater element checks out ok, but the wires that are plugged into it are scorched. There is no link buildup, and nothing else appears to be burned or melted.
There are 2 thermal switches on the vent and 1 one the heater box, could these have anything to do with this? I'm not sure how to check them to see if they are working.
Thanks

Online AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 8928
  • Country: us
    • Buy me a beer through paypal
    • ApplianceJunk.com - Appliance Repair Help
Re: Kenmore Dryer Model 110.76660100 Heater wires burned
« Reply #1 on: December 17, 2007, 06:11:38 PM »
Hi,

You will need to replace the dryer cord, not the outlet in the wall.
The new 4 wire dryer cord you will need to buy should have instructions with it.

Quote
There are 2 thermal switches on the vent and 1 one the heater box,

Chances are that the wires that burnt just need to be replaced.
If the dryer was getting to hot one of the thermo fuses would have blown.

I would repair the wires, replace the dryer cord with the four wire cord and try it.

You can check the dryer temp at the vent on the back of the dryer when it's running. Should be around 145-165 deg. F


Hope you find our site helpful.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore Dryer Model 110.76660100 Heater wires burned
« Reply #2 on: January 16, 2008, 01:31:15 PM »
the 4 wire pigtail(cord) has 2 grounds(white and green) the wite wire goes to the middle terminal on the block the red wire hooks to the side that has a red wire going into the dryer the black wire goes on the black side. The green wire connects to a green screw on the dryer and acts as chassis ground. The wiring instructions may be on the back of the dryer also. The wires on the heater get burned over time. a 2 wire kit can be bought at an appliance parts outlet for about 5 bucks.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Kenmore Electric Dryer - Model F60909644

Started by txgal

Replies: 1
Views: 2928
Last post August 07, 2007, 08:21:33 AM
by AJ
Kenmore gas dryer Model #110.8318272, burner will not light

Started by jdubb4045

Replies: 12
Views: 3501
Last post March 31, 2014, 02:28:32 PM
by TimD
Removal of fan on Kenmore Dryer Model 110.63942101

Started by Keys

Replies: 3
Views: 2397
Last post April 07, 2010, 07:51:03 PM
by JWWebster
Kenmore Model 70 electric dryer heating element 279838

Started by kjb

Replies: 1
Views: 3937
Last post April 24, 2010, 12:47:40 PM
by JWWebster
Kenmore Gas Dryer model 110.77082600.

Started by Sticks1947

Replies: 2
Views: 825
Last post December 20, 2011, 10:25:29 AM
by whirlpooltech
Kenmore 90 series dryer model 110.60901990 does not shut off in any cycle.

Started by dirtydog

Replies: 1
Views: 987
Last post December 21, 2011, 09:17:44 AM
by bigbuck