Author Topic: Whirlpool Duet Washer F30 Error  (Read 3714 times)

Offline crgibson

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 1
Whirlpool Duet Washer F30 Error
« on: March 06, 2009, 11:57:37 AM »
We purchased Whirlpool Duet washer in December 2007. We have had this recurring problem with the washer - once while it was under warranty and again in January of this year. We get the F30 error and there is a clicking sound on the left top by the detergent dispenser.

When the first service technician came in September, I saw that the arm on the detergent dispenser was getting stuck (as shown in the picture in the post on March 14, 2008) as it bumped up against the little stop on the left. The service technician only touched the arm and it went back into place. He said it was fixed.

Now that machine is out of warranty, the same thing has happened. We keep the top off the machine and have taped a plastic cylinder over the small plastic stop on the left and this appeared to correct the problem (saw where someone else used gum...). We now have another service call and they are going to replace the detergent dispenser and motor, but not the arm (actuator?). We received the replacement parts and they look the same as the original - same small stop on the left that is supposed to stop the arm when it is tracking to the left. I'm not sure how just replacing these parts will fix the problem.

Does anyone have any more recent experience with this problem and know what the real problem is and how it should be fixed? Should we also be replacing the actuator (assume this is the arm?)

I agree with some other owners - for a $1000 machine, this is ridiculous that this kind of problem can occur within the first year or two of service. This is not a part that has failed, but appears to be a design issue with this mechanism.

Any advice you can offer would be appreciated.

Model Number: WFW9400SU00 icon

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Whirlpool Duet Washer F30 Error
« Reply #1 on: March 06, 2009, 07:08:33 PM »
The problem is within the actuator motor for the dispenser. Replacing it should solve the problem.  For German engineering, this is one spot that has been an issue on the Duet. If you look at all the other brands out there, you will find discrepancies with them as well, so if you must harp, go ahead. It's all expected in todays products.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Whirlpool Duet Washer - F-30 error code and clunking noise in detergent area.

Started by AJ

Replies: 3
Views: 14085
Last post November 15, 2009, 09:34:58 AM
by AJ
Whirlpool Duet Washer Error Codes

Started by AJ

Replies: 0
Views: 28106
Last post September 13, 2008, 10:38:25 PM
by AJ
Whirlpool Duet Washer F5 Error Code

Started by TechnicianBrian

Replies: 2
Views: 9835
Last post October 05, 2008, 08:39:47 PM
by TechnicianBrian
WHIRLPOOL DUET WASHER ERROR CODES

Started by IPSONDN1

Replies: 3
Views: 9436
Last post December 12, 2008, 12:48:37 PM
by IPSONDN1
MESSAGE ERROR F 30 WASHER WHIRLPOOL DUET SPORT 2007

Started by guillaumef33

Replies: 1
Views: 2645
Last post December 31, 2008, 05:05:44 AM
by Repair-man
Whirlpool Duet Washer WFW9250WW00 shows LF 'Long Fill' Error

Started by AJ

Replies: 8
Views: 7008
Last post November 09, 2013, 12:07:22 PM
by leona