Author Topic: PAV3200AWW Washer is stopping when it get s to rinse cycle  (Read 3186 times)

Offline mondoman

  • VIP Member
  • Member Since: Dec 2007
  • Posts: 1
PAV3200AWW Washer is stopping when it get s to rinse cycle
« on: December 15, 2007, 12:28:40 PM »
Washer is stopping when it get s to rinse cycle, timer is clicking, this is an intermittent problem. when the washer stop it seems like timer is malfunctioning as washer will not do any function. Then it function flawlessly for a week then it happens again. Any suggestions?

Model PAV3200AWW

Offline apptech

  • Technician
  • Member Since: Sep 2007
  • Posts: 160
Re: PAV3200AWW
« Reply #1 on: December 16, 2007, 12:11:43 PM »

The washer uses only cold water durning the rinse cycle.
If the washer stops during the rinse cycle and is not full of water then you need to check the water inlet valve.

You can remove the hoses on the back of the washer to see if the water inlet valve screen is getting plugged up.


frigidaire washer smoking and only spins on rinse cycle

Started by jazzly

Replies: 3
Views: 4680
Last post November 09, 2008, 09:51:21 AM
by Repair-man
Sears Kenmore HD80 Series Washer Skipping Rinse Cycle

Started by rljulian

Replies: 2
Views: 5492
Last post January 14, 2009, 08:07:55 AM
by Mr. Fix-It
Whirlpool Commercial Washer only fills 1/2 way or less or rinse cycle

Started by bsponge

Replies: 1
Views: 3135
Last post February 24, 2010, 12:49:23 PM
by JWWebster

Started by bizrapspin

Replies: 10
Views: 7745
Last post November 16, 2010, 01:05:42 PM
by ryan111
GE washer that won't fill all the way in rinse cycle

Started by tagarman

Replies: 15
Views: 15911
Last post March 09, 2014, 03:32:24 AM
by olyteddy
Older Maytag Commercial Coin-op Stopping at Rinse Cycle.

Started by leonleoj

Replies: 4
Views: 1946
Last post July 06, 2013, 02:40:29 PM
by theoldstoveguy