Kenmore 70 Series Motor Wiring

[am0101]

Thanks everyone who is helping me here.

Is there a possibility of Tramsmission failure too? any video or diagram to replace clutch ?

[JWWebster]

The clutch mounts on top the tranny. The liner comes right out when you squeeze the spring. You ain't gotta buy the whole clutch. their is a liner kit for half the price.

[am0101]

Part number for liner please. Video or diagram would be great help.

thanks.

[Repair-man]

Try this:

Clutch Replacement

[JWWebster]

Repair man, super super good job on that clutch page!!!

[am0101]

Alright, I got pics of Clutch and break/drive. Clutch looks fine to me, but you experts know more than me.

As always, thanks for your help.

[JWWebster]

Looks like your problem is the white part in the second picture. The tip end looks broken off and won't catch the clutch just right. take a look here at the new part: http://www.repairclinic.com/SSPartDetail.aspx?s=t-110.20702990-%3d%3di2670&PartID=2670

[JWWebster]

The end of the brake release has to catch the clutch when it goes into spin to release the tub brake. When you open the lid this feature brakes the tub and stops it from spinning immediately.

[am0101]

Thanks JWWebster,
So that white part is a part of Break assembly ? If I already had ordered the Clutch, will it come with it or do I need to order another part which you suggetsted?

Appreciate your help, .

[Al Capone]

If you ordered the clutch assembly it looks to me from the photo that it comes with that part.

285785 Whirlpool Washer Clutch Assembly

[am0101]

thx. yea...let me wait till I received it then will pop up here again.

[Al Capone]

thx. yea...let me wait till I received it then will pop up here again.

 

Keep us update.

[JWWebster]

It should come with the kit as pictured Kimosabe

[am0101]

I got the clutch and it was exactly the same as shown in that picture.

I installed it. NOw washer is not agitating or spinning. Feels like break is jam. NOt sure what to do next. Is there any way to Service this Break and Drive part?

Please help....

Thanks,
am0101

[JWWebster]

You gotta get the clutch lined up right and nothing can be in a bind.