Author Topic: Sqeaky Rollers - Replace or Clean?  (Read 1481 times)

Offline drgrafix

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 5
Sqeaky Rollers - Replace or Clean?
« on: March 01, 2009, 09:34:13 PM »
Our Matag front loading dryer recently (about 2 weeks ago) started squeaking so I took the fron off, vacumed all the lint, and cleaned the outer surface of the rollers with crud cutter on a rag.  Didn't remove them.  Then I shot some CRC Power Lube into the "bearing area" and a little on the idler bearing.  Buttoned it up and the squeaking is gone for now.

So the question is; If a little lube gets rid of the squeaking, does that mean pulling the rollers off and thoroughly cleaning with alcohol and applying some teflon paste very lightly to the shaft will resolve the problem?  Or does any sort of squeaking mean the rollers must be completely replaced?

Model MDG9206AWW

 

Video: How to take your Whirlpool dryer apart to replace parts & remove lint

Started by AJ

Replies: 0
Views: 21147
Last post August 16, 2007, 06:02:43 PM
by AJ
How to replace Whirlpool Dryer Motor.

Started by AJ

Replies: 2
Views: 8012
Last post January 15, 2009, 08:13:09 PM
by AJ
Noisy Frigidiare Dryer - Replace Rear Bearing.

Started by AJ

Replies: 3
Views: 6623
Last post March 31, 2008, 08:25:34 PM
by Al Capone
dryer motor replace

Started by tank

Replies: 8
Views: 3230
Last post December 31, 2008, 12:57:09 PM
by JWWebster
Video: How to replace Whirlpool dryer drum roller, part # 349241T

Started by AJ

Replies: 0
Views: 1520
Last post May 19, 2012, 08:50:04 AM
by AJ
New Drum, Rollers Too?

Started by longinvstr

Replies: 4
Views: 1716
Last post September 17, 2009, 12:05:01 PM
by JWWebster