Hey everyone, My stove stopped working the other day and I think I've narrowed the problem down to the Electronic Oven Control but I wanna get everyone's input considering I've never messed with Electric Stoves or any appliances for that matter. And also, the part is pretty expensive to replace. I'll list the steps that I took to narrow the problem down to the Control/Clock Panel
1. Flipped breakers several times
2. I then checked the Ohms in the heating element and got a reading
of 20 I think
3.Next, I checked the voltage of each side of the heating element,
the right side got all 120 volts but the left side didn't
4.The left side of the heating element is supposed to get its power
from the L2 out connection on the Control Panel. L2 In had all the
120 volts so I think something is wrong with the circuit not
transferring the power from the L2 In to the L2 Out.
I'm not sure if there could be anything else wrong so please, any input would be much appreciated!