Author Topic: changes settings on own  (Read 1083 times)

Offline deb5734

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 4
changes settings on own
« on: February 22, 2009, 11:55:06 AM »
our machine changes it settings mid cycle if I put it on normal wash it will change it to quick wash in mid cycle,   won't let me stop the machine to change the setting back.  I am not receiving error codes.  it beeps during a cycle sometimes a dozen time and sometime just a few times.
it sounds like some computer malfunction.

Model fav6800aww

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: changes settings on own
« Reply #1 on: February 22, 2009, 02:09:20 PM »
I agree with your prognosis, although the Neptune Topload manual is here in case you want to run the diagnostic cycles to be sure. A control board or the touch panel is the issue, one way or another. Once you run your diagnostics and decide to replace the control, it is pictured below and you may click to order.

« Last Edit: February 22, 2009, 02:11:22 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

only hot water on all settings, mod.#wtw57esvh0 , whirlpool

Started by repairguy42

Replies: 1
Views: 732
Last post March 06, 2012, 04:59:41 PM
by JWWebster
Maytag Washer will not spin dry in certain settings

Started by Tanner

Replies: 9
Views: 1513
Last post September 21, 2012, 01:24:17 PM
by Tanner