Author Topic: amana clothes dryer LEA50AW  (Read 2005 times)

Offline jmsrnsn

  • VIP Member
  • Member Since: Dec 2007
  • Posts: 2
amana clothes dryer LEA50AW
« on: December 13, 2007, 09:31:12 PM »
My dryer's timer won't shut off completely. The dryer works ok, but the timer keeps ticking and keeps moving. I figured it was a bad timer, so I put a new one on there, but it does the same thing as the old one. Just wondering if anyone else has seen this problem before, or might have any idea of what I should check. Thanks for any help.

Model LEA50AW

Online AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 8913
  • Country: us
    • Buy me a beer through paypal
    • ApplianceJunk.com - Appliance Repair Help
Re: amana clothes dryer LEA 50AW
« Reply #1 on: December 17, 2007, 06:05:49 PM »
Hi,

Does the timer not shut off on the times and auto cycles?

If the timer does not shut off on the timed cycle then you will need to check for power to the timer motor.

If there is power to the timer motor on the timed cycle you have a bad timer.

If there is no power you will need to trace it back to see were you lost the power.

Most often if the timer does not advance to off on the timed cycle the timer is bad.


 

Amana dryer making noise

Started by bigvonne

Replies: 1
Views: 2205
Last post May 19, 2008, 12:53:38 PM
by apptech
Whirlpool Dryer won't keep running after door opened when clothes are dry

Started by Nancy

Replies: 4
Views: 1919
Last post February 10, 2008, 12:32:34 PM
by JWWebster
Simpson Maxi Dry 505 (reverse cycle clothes dryer)

Started by laudesan

Replies: 6
Views: 2804
Last post April 26, 2008, 06:36:15 PM
by laudesan
Frigidaire Dryer Tearing Clothes

Started by TechnicianBrian

Replies: 0
Views: 3291
Last post June 06, 2008, 01:58:24 PM
by TechnicianBrian
Dryer ruins clothes!

Started by hurlburt

Replies: 3
Views: 2755
Last post September 28, 2008, 02:45:54 PM
by JWWebster
Amana Dryer Thumping Noise

Started by TechnicianBrian

Replies: 0
Views: 3010
Last post October 29, 2008, 05:00:44 AM
by TechnicianBrian