Author Topic: WTA 3500uc/08 Bosch Dryer  (Read 1458 times)

Offline jhips

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 1
WTA 3500uc/08 Bosch Dryer
« on: February 18, 2009, 01:04:51 PM »
 I have a Bosch wta 3500uc/08 dryer that seems only run in the "anti-crease" mode as it reverses direction every few seconds and doesn't heat. Any suggestions? can this be turned off.

Offline Penguin45

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 81
    • www.ukwhitegoods.com
Re: Bosch Dryer
« Reply #1 on: February 22, 2009, 08:14:37 PM »
You've most likely got a 50/50 chance with this. There is an NTC temperature sensor in the filter duct, which may be playing up. This is a "Negative temperature co-efficient" device - the hotter it gets, the lower the resistance. It operates in the kOhm range on your multimeter. If you can prove continuity from the sensor to the pcb and the sensor itself is functional, the pcb is at fault.

Penguin45.

 

WTA 3500 UC 80/IV Bosch Dryer

Started by Jake

Replies: 9
Views: 11170
Last post June 13, 2008, 05:53:51 PM
by AJ
Bosch WTA34 WTA35 Tumble Dryer Repair Instructions

Started by AJ

Replies: 0
Views: 2013
Last post June 06, 2008, 07:06:38 PM
by AJ
WTE-86300US FAULT CODE FOR BOSCH VENTLESS DRYER

Started by MP

Replies: 0
Views: 3027
Last post November 20, 2008, 04:15:42 PM
by MP
Possible Bosch Dryer problem ?

Started by soccerdad48

Replies: 1
Views: 2875
Last post April 30, 2010, 08:37:10 PM
by BarbieBoston
wtmc3300us/01 bosch dryer

Started by greg

Replies: 0
Views: 2097
Last post July 14, 2010, 12:06:55 PM
by greg
need service manual bosch dryer

Started by bkendall

Replies: 2
Views: 1919
Last post April 20, 2011, 05:53:15 PM
by bkendall