WTA 3500uc/08 Bosch Dryer

[jhips]

 I have a Bosch wta 3500uc/08 dryer that seems only run in the "anti-crease" mode as it reverses direction every few seconds and doesn't heat. Any suggestions? can this be turned off.

[Penguin45]

You've most likely got a 50/50 chance with this. There is an NTC temperature sensor in the filter duct, which may be playing up. This is a "Negative temperature co-efficient" device - the hotter it gets, the lower the resistance. It operates in the kOhm range on your multimeter. If you can prove continuity from the sensor to the pcb and the sensor itself is functional, the pcb is at fault.

Penguin45.