Author Topic: End Cycle light will not go off  (Read 1372 times)

Offline helpusfixit

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 1
End Cycle light will not go off
« on: February 16, 2009, 09:38:14 AM »
I have replaced the timer & the door latch module.   The Dishwasher will not advance automatically to a new wash cycle unless I manually advance the timer.   All cycles perform once you move the timer manually.   Each time you want to do a wash you have to turn the timer manually.   The light should go off when you open the door.   What is causing it to stay on?   Why won't the timer move then the door opens?

Model Number: KUDS230Y0 icon

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: End Cycle light will not go off
« Reply #1 on: February 16, 2009, 06:44:41 PM »
I had this probo once and you know what it was? One of the small timer motor wires was had come loose.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline BrntToast

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 388
  • Mayday Appliance Service
    • frigidaire service blog
Re: End Cycle light will not go off
« Reply #2 on: February 16, 2009, 10:44:24 PM »
do you have the pots/pans or sanatise function selected?
if so turn all heat functions off on the selector switch and retry the machine

i cant find your exact model's schematic, but it looks like units with the pots/pans and water heat options stall the timer untill the water is heated, the thermostat that controls the water heat may be defective
Mayday Appliance Service
Winnipeg Manitoba Canada


The only stupid question is the one not asked

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: End Cycle light will not go off
« Reply #3 on: February 17, 2009, 03:37:12 AM »
Here's the Tech Sheet
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

DFUD041 Viking Dishwasher stop in cycle and heavy light blinks

Started by krazytech

Replies: 4
Views: 2921
Last post June 16, 2011, 12:04:57 AM
by AJ
dishwasher run part cycle, then jumps to flashing clean & heated dry light

Started by CookieGuru

Replies: 1
Views: 1192
Last post August 01, 2012, 06:26:05 PM
by haroldsappliance
Whirlpool Dishwasher GU1200XTLQ1 Dead, clean light blinks.

Started by barb

Replies: 2
Views: 7075
Last post August 11, 2007, 08:05:47 AM
by barb
GE Dishwasher Will not pump on wash cycle

Started by bp0611

Replies: 1
Views: 3968
Last post February 25, 2008, 07:38:59 AM
by apptech
whrilpool dish water does'nt start wash cycle

Started by gary

Replies: 1
Views: 2689
Last post June 17, 2008, 08:25:45 AM
by whirlpooltech
Door leaks upon cycle start -- KitchenAid

Started by hsf

Replies: 2
Views: 1821
Last post September 29, 2008, 09:06:41 AM
by hsf