My Jenn-Air range, model #2023781, ser # 883383BQ, will no longer self clean. I followed the instruction in the manual to set up the self cleaning. It says the following:
Turn selector and temperature knob to clean.
Closed and locked the oven door.
Hit enter for start and stop times.
The fan turns on with the selector knob, but the clean lite no longer turns on and the oven does not heat up. I looked at the micro switches for the latch and they are making and braking. I used an ohm meter to verify that I could read through the switches. The latch solenoid makes but then drops out once the door is locked...not sure if this should happen?
What else can I check?