Author Topic: Infrared Thermometers  (Read 1439 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9393
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Infrared Thermometers
« on: February 09, 2009, 11:27:04 PM »
I would like to try one of the Fluke infrared thermometers someday.

Like the Fluke 62 Mini Infrared Thermometer or the Fluke 561 Infrared and Contact Thermometer.

Fluke Case Study: When infrared surveys pay off for HVAC (pdf file)

Do you use a infrared thermometer?

If you do use a infrared thermometer please tell us a little bit about it like the make/model.

Do you find a infrared thermometer useful?

Would you buy one again?

If you don't have one would you like to try one?
Hope you find our site helpful.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Infrared Thermometers
« Reply #1 on: February 10, 2009, 05:59:43 AM »
I have the MT4 bought on ebay a few years ago...

one with an external K sensor would be nice.

same model numbers have different maximum temps...

some models have the laser pointer (used only for aiming)

RayTek
« Last Edit: February 10, 2009, 06:02:01 AM by RegUS_PatOff »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Infrared Thermometers
« Reply #2 on: February 10, 2009, 09:17:22 AM »
Marcone has a cheap one that works quite well.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Icehouse

  • Technician
  • Member Since: Oct 2008
  • Posts: 566
    • hvacbob
Re: Infrared Thermometers
« Reply #3 on: February 10, 2009, 05:00:27 PM »
They work well to find out how good a cleaning job on a condenser you did. Just run it back and forth, and look for the "hot" spots.  :)
NATE, NCCER, PHCC,HVAC Certified Instructor
Member RSES, US Army Refrigeration Specialist(Retired), Former Refrigeration Teacher NYC Board of Ed.
a tragedy has happen to me : http://web.me.com/zenzoidman/Bobice/

Offline BrntToast

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 388
  • Mayday Appliance Service
    • frigidaire service blog
Re: Infrared Thermometers
« Reply #4 on: February 10, 2009, 10:02:58 PM »
i have a small key chain IR therm i got from princess auto for 20 bucks on sale
its been flopping around on a 5lb key ring for years and still works
i use it to find hot spots in old stove wiring and fuse holders
Mayday Appliance Service
Winnipeg Manitoba Canada


The only stupid question is the one not asked

Offline shieldcracker

  • VIP Member
  • Member Since: Nov 2008
  • Posts: 86
Re: Infrared Thermometers
« Reply #5 on: February 11, 2009, 08:41:24 PM »
A infra-red temp gun is to a contact thermometer what a volt-probe stick is to a voltmeter.

CAVEAT EMPTOR

 

Infrared Thermometer

Started by applianceking

Replies: 11
Views: 1544
Last post August 01, 2012, 01:49:04 PM
by JWWebster