13 months ago you helped me out figure out that I needed to place my wax motor, and either buy a new control board or replace the resistor R-11 and Q-6 Triode. I chose the cheaper fix.
However this time, my washer does not spin out the water, the door will lock and the lock light comes on, the light inside the drum works it just does not spin. What could it be? I did make sure the drain hose was not kinked and it has a little twist in it but it is not kinked.
You spoke on another situation regarding checking the drain valve, it was a different model but should I be checking it and how do I do that.
Thanks for your time