Author Topic: Maytag Dryer died  (Read 8935 times)

Offline TXwannabe

  • VIP Member
  • Member Since: Aug 2008
  • Posts: 36
  • Back in Texas since October!
Maytag Dryer died
« on: February 05, 2009, 09:47:34 AM »
Hello, again! This board has been a great salvation for me in the past, so I look to you again for guidance (even more important now that I got laid off last week!).

Maytag Electric Dryer (old) just quit working, no warning. Dried a load just fine last time, wife goes to use it today, and nothing- just silence, no buzz, no hum, nothing. Checked for power at the receptacle, and have power there. Can hear the safety door switch clicking when pressed. Beyond that, not sure where to start?
Can it be the timer? or should I start somewhere else?

Thanks!

Model LDE8704ACE

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Dryer died
« Reply #1 on: February 05, 2009, 10:13:09 AM »
This is a fairly simple dryer to fix. Look for the duct fuse mounted on the heater. Take the screws at the bottom front off and you can easily access this beauty. It is worth fixing by the way even if the motor blew up. You won't find anything better out there. Lets hope it is just a blown duct fuse(1st pic). Check your vent.
« Last Edit: February 05, 2009, 10:17:15 AM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 8933
  • Country: us
    • Buy me a beer through paypal
    • ApplianceJunk.com - Appliance Repair Help
Re: Maytag Dryer died
« Reply #2 on: February 05, 2009, 10:15:23 AM »
Quote
even more important now that I got laid off last week!

Sorry to hear that.
Hope you find work soon.

Hope you find our site helpful.

Offline TXwannabe

  • VIP Member
  • Member Since: Aug 2008
  • Posts: 36
  • Back in Texas since October!
Re: Maytag Dryer died
« Reply #3 on: February 05, 2009, 10:17:33 AM »
Awesome! Headed downstairs now to check.

 ;DBy the way, let me add my 2 cents to the post "What I like about Appliance Junk posting. This has been a great site, with excellent advice given to me on multiple occasions.

Thanks for this great service you provide us DIY'rs!

Offline TXwannabe

  • VIP Member
  • Member Since: Aug 2008
  • Posts: 36
  • Back in Texas since October!
Re: Maytag Dryer died
« Reply #4 on: February 05, 2009, 11:01:00 AM »
OK, thermal switch on heater is OK on continuity. Also checked push-button 'on' switch. Also OK on continuity when pressed. Door switch OK on continuity when pressed.

Looked at the Maytag Dryer service manual posted on AJ, and on page 3-21 it talks about a 160 degree thermostat. I removed the thermostat cover on the front of the dryer, and heve checked continuity across the black and purple wires (I assume that's what BK and PU are?), and on my digital meter I am not getting total continuity. It reads 10.7, not the typical .001 or .002. I am thinking that's telling me I have an issue? The manual says, "no continuity, replace"

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 352
Re: Maytag Dryer died
« Reply #5 on: February 05, 2009, 11:45:37 AM »
You have to remove one of the wires to get a true reading on the thermostat.

Offline TXwannabe

  • VIP Member
  • Member Since: Aug 2008
  • Posts: 36
  • Back in Texas since October!
Re: Maytag Dryer died
« Reply #6 on: February 05, 2009, 11:47:54 AM »
Aha! Let me try that- Thanks!

Offline TXwannabe

  • VIP Member
  • Member Since: Aug 2008
  • Posts: 36
  • Back in Texas since October!
Re: Maytag Dryer died
« Reply #7 on: February 05, 2009, 11:52:21 AM »
OK, so when I remove the wires and check across black and purple, no continuity. That's tells me that is the issue, I believe?

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Maytag Dryer died
« Reply #8 on: February 05, 2009, 12:01:07 PM »
You have to remove one of the wires to get a true reading on the thermostat.

If it doesn't have continuity with the wires connected, it won't have continuity by itself...
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Dryer died
« Reply #9 on: February 05, 2009, 12:08:32 PM »
don't check the wires check the part
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Maytag Dryer died
« Reply #10 on: February 05, 2009, 12:14:53 PM »
don't check the wires check the part
If it doesn't have continuity with the wires connected, it won't have continuity by itself...
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 352
Re: Maytag Dryer died
« Reply #11 on: February 05, 2009, 12:51:35 PM »
He got a reading with the wires connected. But JW's right test the part with at least one wire off not the wires.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Maytag Dryer died
« Reply #12 on: February 05, 2009, 01:32:15 PM »
... I am not getting total continuity. It reads 10.7, not the typical .001 or .002. I am thinking that's telling me I have an issue?

He got a reading with the wires connected. But JW's right test the part with at least one wire off not the wires.

He got a reading of "10". It's bad
If you're only testing to see if a switch or fuse has continuity,
If it doesn't have continuity with the wires connected,
it won't have continuity by itself...
« Last Edit: February 05, 2009, 01:48:03 PM by RegUS_PatOff »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline TXwannabe

  • VIP Member
  • Member Since: Aug 2008
  • Posts: 36
  • Back in Texas since October!
Re: Maytag Dryer died
« Reply #13 on: February 05, 2009, 02:00:51 PM »
 :(
So, went to the local parts store, and they tell me it can't be the 160 degree thermostat if the dryer won't start at all. It could only be that if the dryer wasn't getting hot. Wanted to sell me the thermal fuse that JW suggested early this morning, but that part is OK. So, I am back to square one. If the thermal fuse has continuity, what's next? Dryer is dead -

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 352
Re: Maytag Dryer died
« Reply #14 on: February 05, 2009, 02:27:16 PM »
Hi limit thermostat shuts everything down try that.

 

LDG7304 Maytag Dryer - making a lot of noise.

Started by robert

Replies: 5
Views: 5102
Last post February 20, 2011, 07:33:06 PM
by jumptrout51
Maytag Dryer Problem

Started by jborden

Replies: 10
Views: 5880
Last post August 15, 2007, 12:06:18 PM
by AJ
Video: How to check voltage at cord on a Maytag electric dryer.

Started by AJ

Replies: 0
Views: 5770
Last post July 31, 2007, 12:38:27 PM
by AJ
maytag neptune dryer is really noisy

Started by joy

Replies: 1
Views: 2844
Last post October 09, 2007, 07:43:45 AM
by AJ
Maytag Neptune Dryer 4000 noise

Started by sparky823

Replies: 14
Views: 4608
Last post November 28, 2007, 10:36:02 PM
by sparky823
Maytag dryer, can't figure it out!!

Started by dwatts

Replies: 14
Views: 3963
Last post November 19, 2007, 07:16:45 AM
by AJ