Author Topic: How to replace a Whirlpool Duet washer bellow tub door seal  (Read 76119 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9601
  • Country: us
    • ApplianceJunk.com - Appliance Repair
How to replace a Whirlpool Duet washer bellow tub door seal
« on: December 04, 2007, 09:48:11 PM »
In this guide we use a Whirlpool GHW9100LW0 Duet washer to show you how to replace the bellow.

This is the main seal between the front bulkhead and the outer tub.

This is a easy repair and should take about a half hour to a hour if you have never installed one before.



Whirlpool Duet Front Load Washer Bellow Tub Door Seal Part # 8181850



**Disconnect the power to the washer before you start any repairs**

Remove the three screws on the back of the washer that hold the top on. Remove the top and set it aside.

Remove the soap dispensor and remove the screw inside the hole, see "B" in the photo.


Now you will need to remove the control panel. Once the screw behind the soap despensor has been removed it just unclips at the top. You may need to use a flate blade screwdrive to help you remove it.



Now set the control panel on top of the washer.


Open the washer door. Locate the cable spring as shown in the photo. Remove the cable.




Next you will have to remove the three (1,2,3) door switch screws.
Then remove the bottom panel. It is held on with three (A) screws on the bottom of the washer.



Peel the font of the bellows off of the washer and fold it into the tub.
Next close the door and remove the four screws (one at each corner, B) that hold the bulkhead on.



Once you have the buldhead removed all that is left to do is remove the rear bellow clamp.



Once you have the rear bellow clamp removed you will be able to easily remove the old bellow.

Replace the old bellow with the new one and put the washer back together.



Whirlpool Duet Front Load Washer Bellow Tub Door Seal Part # 8181850
« Last Edit: December 04, 2007, 10:17:35 PM by AJ »
Hope you find our website helpful.

Offline Zero.Geez

  • VIP Member
  • Member Since: Jun 2010
  • Posts: 1
Re: How to replace a Whirlpool Duet washer bellow tub door seal
« Reply #1 on: June 13, 2010, 05:01:08 AM »
We used these instructions yesterday and they worked like a charm!  Can't thank you enough for posting it and giving us the confidence to try to fix the washer.  O0

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: How to replace a Whirlpool Duet washer bellow tub door seal
« Reply #2 on: June 13, 2010, 08:21:42 AM »
I recommend using a Sharpie marker to mark the position of the inner bellow clamp before removing it.    You DO NOT want to over tighten that clamp.
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

Offline jason43050

  • VIP Member
  • Member Since: Apr 2011
  • Posts: 2
Re: How to replace a Whirlpool Duet washer bellow tub door seal
« Reply #3 on: April 24, 2011, 09:20:41 PM »
I recommend using a Sharpie marker to mark the position of the inner bellow clamp before removing it.    You DO NOT want to over tighten that clamp.
How tight is too tight??

Offline jason43050

  • VIP Member
  • Member Since: Apr 2011
  • Posts: 2
Re: How to replace a Whirlpool Duet washer bellow tub door seal
« Reply #4 on: April 26, 2011, 03:41:43 PM »
I used these directions and it worked like a charm! Thanks!  O0

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9601
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: How to replace a Whirlpool Duet washer bellow tub door seal
« Reply #5 on: April 26, 2011, 06:33:05 PM »
Glad you found our site helpful.  O0
Hope you find our website helpful.

Offline RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 717
  • Country: ca
Re: How to replace a Whirlpool Duet washer bellow tub door seal
« Reply #6 on: April 26, 2011, 07:47:29 PM »
I need to invent a tool to put the spring loaded outer clamp back on . At times they go back on like butter ,other times not so good and then frustration takes over . If that tool has already been invented let me know . (and I don't mean 2 needle nose pliers ) LOL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9601
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: How to replace a Whirlpool Duet washer bellow tub door seal
« Reply #7 on: April 26, 2011, 07:58:22 PM »
The LG spring tool towards the bottom of this page may work.

http://appliancejunk.com/forums/index.php?topic=1579.0

I don't have the tool myself so I can't say for sure.
Hope you find our website helpful.

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1526
  • Country: us
    • Buy me a beer through paypal
Re: How to replace a Whirlpool Duet washer bellow tub door seal
« Reply #8 on: April 27, 2011, 12:11:03 AM »
I've been doing these with the front panel in place. It's probably a lot easier with the panel removed, just a few extra steps.
For the front clamp, I hold it in place at the end of spring with my knee.  Then I can use both hands to work the clamp into place.

Offline dkal

  • VIP Member
  • Member Since: Aug 2011
  • Posts: 3
Re: How to replace a Whirlpool Duet washer bellow tub door seal
« Reply #9 on: August 31, 2011, 10:59:53 PM »
Is there a way to reliably patch the bellow?  I have replaced three parts on this washer already an I am not keen on buying another replacement part.

 

Replace Whirlpool Duet Washer GHW9100LQ2 Front Bellow Tub Seal

Started by AJ

Replies: 0
Views: 1575
Last post December 27, 2011, 11:42:18 AM
by AJ
Whirlpool Duet Sport Front Load Washer Leaking from the Door

Started by TechnicianBrian

Replies: 1
Views: 15374
Last post May 23, 2013, 08:24:30 PM
by Rick32k
8182634 Whirlpool Duet Front Load Washer Door Latch/Lock

Started by AJ

Replies: 0
Views: 5798
Last post April 02, 2009, 09:35:17 AM
by AJ
Video: How to Replace Door Boot Seal (DC64-02805A) on a Samsung Washer

Started by AJ

Replies: 1
Views: 1960
Last post October 18, 2013, 07:33:11 PM
by afterblast
Video: How To Replace a Water Pump On A Whirlpool Made Direct Drive Washer

Started by AJ

Replies: 0
Views: 9189
Last post August 10, 2007, 08:42:54 PM
by AJ
Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!

Started by AJ

Replies: 21
Views: 33749
Last post May 23, 2013, 08:22:19 PM
by Rick32k