GE WASHER HOW TO REMOVE BODY

[edmart]

Help
I have a GE washer model WCXR1070A0WW and it will stop spinning and not remove all the suds and water, what can i do to check this and how do I remove the body?
any help will be appreciated
ED

[JWWebster]

Based on her description of yer washer I would say you has a bad water valve, part # WH13X10024
How long does it take that puppy to fill? FYI that front cover comes off the washer. Right off hand I would say strings are in the pump. Get the gunk out of it. To remove the front panel use the force luke. Get a putty knife and press the clips downwards in between the front and top, being mindful the top ain't going nowhere.

[edmart]

Thanks on removing front panel, but I did not see nothing around the pump what else would cause this not to work

[JWWebster]

Like I said the water valve is probably shot. To get to it flip the top up by removing those screws now that you has the front off you can see em.

[edmart]

Thanks. removed top and I see the water valve so in your opinion you feel i should change this or is there a way to check it?

[Mr. Fix-It]

You probably have blockage in the pump you need to remove it to clean it out.

[JWWebster]

Well you might have something in the pump, part # WH23X10013

[jumptrout51]

Thanks on removing front panel, but I did not see nothing around the pump what else would cause this not to work

Not around the pump..in the pump...remove the hoses from the pump and check the inlets of the pump as well as the hoses.

[edmart]

 
Thanks to all after removing the hoses I found a wire and a some guck in there after cleaning and putting it back it is working great!! another happy customer

[JWWebster]

That old under wire brazierre wire thangy. Yep Glad ye got er fixed

[edmart]

 kNOW MY WASHER STOP SPINNING WHAT DO I CHECK FOR help!!!!!!!!!!!!!!

[Mr. Fix-It]

Is the motor running in the spin cycle? If not it is probably the lid switch, part # WH12X10141

[edmart]

it sounds like its on but nothing is happening

[JWWebster]

Gotta be the way over engineered lid switch safety mechanism. Instead of mounting the dang switch where the strike could hit it all propah they decided to put in an elaborate lever and rod assembly.