Author Topic: Craftsman tools?  (Read 5338 times)

Offline cal

  • VIP Member
  • Member Since: Mar 2008
  • Posts: 5
Craftsman tools?
« on: February 01, 2009, 02:51:18 PM »
Are they any good. I want to get a good set of tools. All I have now is a set of junkie ones.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Craftsman tools?
« Reply #1 on: February 01, 2009, 03:36:29 PM »
Buy Snap ON.
Take a Kid fishing.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Craftsman tools?
« Reply #2 on: February 01, 2009, 07:50:39 PM »
Craftsman is the best for the DIY guy!
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Craftsman tools?
« Reply #3 on: February 01, 2009, 08:46:30 PM »
I believe Craftsman hand tools have a lifetime guarantee, although so does Snap-On, and Harbor Freight.

If a socket or anything breaks, just bring it in, they'll give you a replacement on the spot (they used to)
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Craftsman tools?
« Reply #4 on: February 01, 2009, 09:46:36 PM »
Craftsman is made by a variety of private contractors, one of which is Reed Tool Co. of Houston.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline Icehouse

  • Technician
  • Member Since: Oct 2008
  • Posts: 566
    • hvacbob
Re: Craftsman tools?
« Reply #5 on: February 02, 2009, 06:50:04 PM »
Hand tools, that's easy "Klein"  ;)
NATE, NCCER, PHCC,HVAC Certified Instructor
Member RSES, US Army Refrigeration Specialist(Retired), Former Refrigeration Teacher NYC Board of Ed.
a tragedy has happen to me : http://web.me.com/zenzoidman/Bobice/

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Craftsman tools?
« Reply #6 on: February 02, 2009, 07:45:37 PM »
I would love to have a good pair of Kleins, mines are from the stoneage
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Craftsman tools?
« Reply #7 on: February 02, 2009, 08:15:24 PM »
I would love to have a good pair of Kleins, mines are from the stoneage
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Online theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1282
  • Country: us
    • Buy me a beer through paypal
Re: Craftsman tools?
« Reply #8 on: February 02, 2009, 08:22:05 PM »
Mine are mixture of names. Real Channel lock pliers, A Vaco adjustable wrench,Open end wrenches are mostly PROTO (very old & very precise)& Snap On. Vaco magnetic & non magnetic nut drivers. Stanley screwdrivers. When I graduated from Appliance Trade School I got a set of Craftsman tools, wasn't very impressed & as they broke the replacements got cheaper & cheaper. But the best tool box ever made by far is the PLATT suitcase style tool box. I have owned 5 in 30 years. They last a long time & very professional looking. Well organized so easy to find tools as always in the correct slot. A heavy durable outer no mark/scratch case.(for floors etc. the case will scratch etc.)I think the outer shell is actually a Samsonite suitcase shell reinforced .(It even has a spot for the logo) Very expensive,last one was almost $200.00 without tools. If you compare with a regular case they are expensive but worth it in the long haul if staying in the trade.
« Last Edit: February 02, 2009, 08:23:42 PM by theoldstoveguy »

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Craftsman tools?
« Reply #9 on: February 02, 2009, 08:59:17 PM »
My fave is my 4 in one screwdriver with the Appliance parts and Supply Company of Mobile.Al 50th anniversary logo. Pretty rare and pretty precious.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Craftsman tools?
« Reply #10 on: February 03, 2009, 01:48:16 PM »
My fave is my 4 in one screwdriver with the Appliance parts and Supply Company of Mobile.Al 50th anniversary logo. Pretty rare and pretty precious.

Why, does it have a corkscrew on one end? :)
« Last Edit: February 03, 2009, 01:49:51 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 685
  • Country: ca
Re: Craftsman tools?
« Reply #11 on: February 03, 2009, 04:35:55 PM »
I use xcelite and love them ...Have had same set for 20 years .  :D

Offline shieldcracker

  • VIP Member
  • Member Since: Nov 2008
  • Posts: 86
Re: Craftsman tools?
« Reply #12 on: February 11, 2009, 08:59:01 PM »
There are many better quality tools than craftsman but few brands can provide better value than Craftsman.

Each toolmaker shines in some area EX. Klein= Electrical trades tools specifically pliers. Craftsman does very well on mechanics tools (sockets wrenches...)

When you consider the warranty service and the accessibility Craftsman should be in everyone's possession if not as a primary tool at least as a back up tool.

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 548
  • Country: us
Re: Craftsman tools?
« Reply #13 on: February 11, 2009, 10:09:05 PM »
 I have had Craftsman tools and boxes for 16 years and have no complaints. When I worked in a machine shop my tools were used by me and whoever else decided to borrow them. They held up great and will last a lifetime. The only breakage I had was from using a large flat blade screwdriver as a pry bar and the tip broke off. I brought it to Sears and they gave me a new one, no questions asked. Make sure the tools say Craftsman on them and not Sears. I think they are different quality.

Offline ElectronGuru

  • VIP Member
  • Member Since: Sep 2013
  • Posts: 4
Re: Craftsman tools?
« Reply #14 on: September 05, 2013, 07:35:16 PM »
Make sure the tools say Craftsman on them and not Sears. I think they are different quality.

+1

I grew up with Craftsman.  Worst tool mistake ever, I brought in a worn down set of Craftsman chisels and walked out with a set of Sears only - locked myself right out of the guarantee.

 

CORDLESS TOOLS

Started by chic

Replies: 19
Views: 4857
Last post October 11, 2013, 09:12:26 AM
by nolazach
Couple of old tools

Started by AJ

Replies: 0
Views: 2379
Last post May 25, 2008, 07:08:18 PM
by AJ
Appliance Repair Tools

Started by AJ

Replies: 0
Views: 30444
Last post July 25, 2008, 12:07:05 PM
by AJ
tools

Started by diyguy

Replies: 3
Views: 2484
Last post January 21, 2009, 07:31:36 AM
by Mr. Fix-It
TOOLS

Started by MajorApp

Replies: 7
Views: 2045
Last post January 24, 2013, 09:17:17 PM
by Wedgeman55
transmission tools

Started by bigjon30

Replies: 4
Views: 2221
Last post October 02, 2009, 01:50:46 PM
by jumptrout51