Author Topic: Frigidaire Front Load Washer  (Read 3628 times)

Offline Boo

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 1
Frigidaire Front Load Washer
« on: January 28, 2009, 10:34:53 AM »
Washer tub will not turn or spin. I found an electrical componet had fallen off the Spin Control Module, Frigidaire Part #134285700. The componet is a small black two prong part about the size and shape of a nickel, it has markings NTC 2.5 0328. I soldered it back on and the washer worked fine for two days then went out again. Checked the componet and the solder had melted again. Can't get it to work now. I think I need a new Spin Control Module but am not sure if it could be something further back in the circuitry causing the problem and I might be wasting money??

Mike.

Model FWT645RHS0

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 357
Re: Frigidaire Front Load Washer
« Reply #1 on: January 28, 2009, 12:31:01 PM »
That part is a capacitor and it probably fell out because it overheated. You need a new speed control module.

 

Frigidaire Front Load washer making noise.

Started by curtis

Replies: 3
Views: 7874
Last post July 05, 2007, 09:25:04 PM
by AJ
frigidaire front load washer

Started by Mikki

Replies: 6
Views: 6140
Last post October 17, 2007, 04:42:52 PM
by Mikki
Frigidaire Front Load Washer - Tumble Action Washers with AC Drive Motor Service

Started by AJ

Replies: 0
Views: 2962
Last post January 10, 2009, 09:55:36 AM
by AJ
frigidaire front load washer

Started by diyguy

Replies: 2
Views: 2123
Last post January 27, 2009, 01:33:58 PM
by Mr. Fix-It
FRIGIDAIRE front load washer wil agitate but will not go into a final spin

Started by sjcjmc

Replies: 7
Views: 6451
Last post February 02, 2009, 11:47:19 AM
by Penguin45
Front-Load Frigidaire Washer

Started by natklep

Replies: 5
Views: 3334
Last post March 13, 2009, 09:06:12 AM
by natklep