Model Number: GU1500XTLB2
Problem: Clean LED Blinks 7 times and no response from any inputs. (Unit was operating normal until this fault).
Actions Taken: (Per the service pointer found online for similar models.).
Confirmed the two door switches are working properly (tested with a multimeter).
Confirmed the heating element (tested with multimeter, 12.5 ohms).
Checked all wire connections (pulled off and reinstalled).
Based on an on-line video I found I did not test the thermistor, see http://fixitnow.com/wp/2007/01/20/bl...t-dishwashers/
Ran the High Temp Scour, Air Dry, High Temp Scour, Air Dry diagnostics cycle. This unit