Author Topic: Maytag Washer only drains when spinning, not before  (Read 1876 times)

Offline tigggerz

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 1
Maytag Washer only drains when spinning, not before
« on: January 26, 2009, 11:30:10 PM »
Hello, I have an old Maytag A308 Washer that just started having troubles with the draining.  It no longer drains between the agitation and the spin cycle.  The timer clicks, but nothing happens.  I checked the belts/motor, and the motor doesn't even come on to turn the belts during this time.  I checked all wires, and they are tight.  I also checked the control switch on top of the motor, and when the drain timer comes on, all wires from main board behind control knob are hot.  

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag Washer only drains when spinning, not before
« Reply #1 on: January 27, 2009, 06:09:12 AM »
You need a 205001 timer.



"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Maytag washer not spinning/different senerio then last time

Started by scubachris

Replies: 4
Views: 2270
Last post February 09, 2009, 08:49:52 PM
by scubachris
Maytag Neptune Washer Not Spinning - Blown 10A Fues on Motor Board

Started by frgivn

Replies: 2
Views: 5630
Last post November 08, 2009, 06:58:38 AM
by apprich
Old Maytag washer banging when spinning

Started by demar

Replies: 4
Views: 5929
Last post February 06, 2010, 03:40:01 PM
by demar
Maytag Front Load Neptune Washer Banging Noise when Spinning

Started by dkmminc

Replies: 11
Views: 12547
Last post June 17, 2010, 11:05:11 PM
by schaffersapplian
maytag washer stops spinning very fast then makes loud squeak at the end.

Started by repairguy42

Replies: 9
Views: 11001
Last post June 24, 2010, 11:07:44 AM
by JWWebster
Maytag A183 washer drains during Spin cycle fill

Started by Louis

Replies: 2
Views: 2375
Last post August 28, 2010, 01:26:03 PM
by JWWebster