KENMORE ULTRAGUARD ULTRAQUITE3 DISHWASHER

[ANNE]

Hi!  My Ultraguard Quiet Dishwasher will not reset.   The Clean lite continuously flashes and the start button will not reset.  There was no water in the dishwasher when discovered so it went through the cycle but now will not reset. When I push the cancel button to reset and nothing. On the cancel button if you press it again it will drain the dishwasher.      I put water in to see if this worked and it does but that seems to be the only thing.  Any suggestions as of course I cannot find my manual for troubleshooting

Model 165.17014402

[jumptrout51]

I am not sure you have a valid model number.
Please double check the model number.

[Repair-man]

This was covered here:
http://appliancejunk.com/forums/index.php?action=dlattach;topic=47.0;attach=27

Here's the Tech Sheet for your model:

Tech Sheet

[Kayakcrzy]

This was covered here:
http://appliancejunk.com/forums/index.php?action=dlattach;topic=47.0;attach=27

Here's the Tech Sheet for your model:

Tech Sheet

If you take off the bottom panel of the front of the dishwasher, you will see the sheet you need to reset the board.  If you get it reset, and it works, see if it happens again in the water heat cycle, then let us know.  If you do a regular cycle, and it works with no problems. We could have a thermostat problem