Author Topic: Maytag washes and does not advance to rinse  (Read 1462 times)

Offline Jaytag

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 143
Maytag washes and does not advance to rinse
« on: January 25, 2009, 06:39:38 PM »
Washes then sits on rinse.  If you advance by hand, it moves into rinse and keeps on washing.  If you lift the lid after all this it drains and advances.

Model MAV9600EWW

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 357
Re: Maytag washes and does not advance to rinse
« Reply #1 on: January 26, 2009, 07:20:12 AM »
Most likely a faulty water valve most washers rinse cold only and if the cold water does not work it will sit in rinse and not advance. To test this set the washer to cold/cold and turn it on most likely no water will enter the tub. Move the temperature selector switch to warm or hot wash and the water will probably start flowing. If so you have a faulty water valve or a plugged screen in the valve.

Offline Jaytag

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 143
Re: Maytag washes and does not advance to rinse
« Reply #2 on: January 26, 2009, 10:25:58 AM »
If it were a faulty water valve, would it not stop first and then sit there?  This keeps washing right through til the end.  Sorry, I put it on colors and that is what it did.

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 357
Re: Maytag washes and does not advance to rinse
« Reply #3 on: January 26, 2009, 12:16:37 PM »
If the water temp was set cold/cold and the cold valve was faulty it would. But any other setting it would fill and wash with hot water but when it got to rinse and the cold water doesn't dispense it will sit and do nothing.

 

Maytag Washer timer reaches rinse and stops advancing

Started by nisebug

Replies: 7
Views: 10171
Last post November 13, 2008, 11:48:51 AM
by Repair-man
Maytag MAH4000 does not go into Rinse-Cycle Intermittent-Issue

Started by granaudio

Replies: 4
Views: 5802
Last post April 22, 2009, 10:36:19 PM
by granaudio
Maytag Neptune Stack Leaks from door during rinse cycle

Started by Jaytag

Replies: 10
Views: 4839
Last post March 30, 2011, 09:54:11 AM
by AJ
Maytag washer- RINSE/SPIN CYCLE FAILURE

Started by bizrapspin

Replies: 10
Views: 5377
Last post November 16, 2010, 01:05:42 PM
by ryan111
Maytag Atlantis stopped during rinse cycle, now completely dead

Started by DrPop

Replies: 6
Views: 2123
Last post March 29, 2013, 04:07:17 PM
by fairbank56
Maytag Centennial TL won't Fill during Wash/Rinse Cycle (MVWC6ESWW1)

Started by rockinrobin

Replies: 2
Views: 1710
Last post April 25, 2013, 09:06:50 PM
by AJ