saw your MANUAL FOR THE wptg9350 BUT A FEW THINGS LOOK DIFFERENT ON THIS MACHINE. Machine has excessive vibration and has ripped a gash 3/4 way around the top of the outer tub. I suspect the suspension rods caused the vibratin dince I found what appeared to be poly fill from a pillow or quilt at the top of each suspension rod. Just trying to figure what all i will need to replace when i try to replace the outer tub and if any other damage has been done. The machine does still fill and spin but with an obvious leak. Are their any tub bearing that will have to be replaced during this job?
Thanks for any help or advice.Bill