Author Topic: Newer error code  (Read 2266 times)

Offline Crow

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 20
Newer error code
« on: January 20, 2009, 12:37:15 PM »
i originally posted the beginnings of my problem a few days ago.
my jenn-air gas wall oven was giving me a "BAKE" error code when the
oven reached temp then would turn off.  i received the service manual
on this site from AJ.   since then the oven froze up with "5A6  6ATH"
possible error codes.  there is nothing in the manual about this problem.

pressing cancel, autoset or anything else does nothing
if anyone has any suggestions, i would be happy to hear from them

thanks
crow ???

Model JGW8130DDW
« Last Edit: January 20, 2009, 12:44:29 PM by Crow »

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9330
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Newer error code
« Reply #1 on: January 20, 2009, 03:50:31 PM »
Hi,

5A6  6ATH = Sabbath

Page 17 in the Service Manual.

Quote
Sabbath Mode

Hold CLOCK for 3 seconds to disable
Sabbath mode.

Hope you find our site helpful.
Follow us on Google+

Offline Crow

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 20
Re: Newer error code
« Reply #2 on: January 20, 2009, 04:08:50 PM »
 :embarassed:

i missed that ......................thanks again

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9330
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Newer error code
« Reply #3 on: January 20, 2009, 04:14:07 PM »
I know when your standing there looking at 5A6  6ATH on the clock it's hard to tell that it really saying Sabbath.

Did you get it out of Sabbath mode then?
Hope you find our site helpful.
Follow us on Google+

Offline Crow

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 20
Re: Newer error code
« Reply #4 on: January 20, 2009, 07:19:59 PM »
out of sabbath mode ...........now just trying to figure out how to get into diagnostic mode by pressing 0/Autoset   and "POWER UP"

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Newer error code
« Reply #5 on: January 20, 2009, 11:23:57 PM »
pressing and holding the AUTOSET pad for 3 seconds while powering-up.
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline Crow

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 20
Re: Newer error code
« Reply #6 on: January 21, 2009, 03:23:26 PM »
in diagnostic mode error code "01  3d21"  was displayed. in the service manual i referenced to sensor resistance, which should be 11000 ohms at 70 degrees....................when i tested mine it wasnt far off ..............any suggestions?????????????????????   :-\

donate
$1, $2, $5, $10, $20, $50
 

Whirlpool Microwave F2Q1 Error Code

Started by TechnicianBrian

Replies: 0
Views: 2051
Last post April 15, 2008, 09:57:53 PM
by TechnicianBrian
Whirlpool Polara Range Error Code

Started by TechnicianBrian

Replies: 5
Views: 8268
Last post December 29, 2008, 09:03:25 PM
by TechnicianBrian
Dacor Range F1 Error Code

Started by TechnicianBrian

Replies: 0
Views: 17489
Last post November 09, 2008, 07:34:10 AM
by TechnicianBrian
error code "BAKE"

Started by Crow

Replies: 3
Views: 1391
Last post January 15, 2009, 10:25:08 PM
by Crow
Frigidaire gas range error code F10

Started by max190

Replies: 4
Views: 9413
Last post February 06, 2009, 02:52:59 PM
by max190
F9 error code on maytag5780 gas range

Started by kdmurphy44

Replies: 1
Views: 2055
Last post February 07, 2009, 08:48:53 PM
by Repair-man