Newer error code

[Crow]

i originally posted the beginnings of my problem a few days ago.
my jenn-air gas wall oven was giving me a "BAKE" error code when the
oven reached temp then would turn off.  i received the service manual
on this site from AJ.   since then the oven froze up with "5A6  6ATH"
possible error codes.  there is nothing in the manual about this problem.

pressing cancel, autoset or anything else does nothing
if anyone has any suggestions, i would be happy to hear from them

thanks
crow

Model JGW8130DDW

[AJ]

Hi,

5A6  6ATH = Sabbath

Page 17 in the Service Manual.

Sabbath Mode

Hold CLOCK for 3 seconds to disable
Sabbath mode.

[Crow]

 

i missed that ......................thanks again

[AJ]

I know when your standing there looking at 5A6  6ATH on the clock it's hard to tell that it really saying Sabbath.

Did you get it out of Sabbath mode then?

[Crow]

out of sabbath mode ...........now just trying to figure out how to get into diagnostic mode by pressing 0/Autoset   and "POWER UP"

[RegUS_PatOff]

pressing and holding the AUTOSET pad for 3 seconds while powering-up.

[Crow]

in diagnostic mode error code "01  3d21"  was displayed. in the service manual i referenced to sensor resistance, which should be 11000 ohms at 70 degrees....................when i tested mine it wasnt far off ..............any suggestions???