kenmore side by side no ice

[clshadid]

kenmore 52582201 side by side I have replaced water filter  and bleed water like it says but I am still not getting water to ice maker. ice maker is going through process but gets no water . I do get water in door. every once in a blue moon it will make a tray.

Model 106.52582201

[jumptrout51]

I don't believe this is a complete model number.
Please check again.

[clshadid]

I checked the model number again and the only other number there is  a tiny 106
in the lower left hand corner before the model #52582201, Coldspot.

[Al Capone]

That 106 is part of the model number.
I corrected the first post to include the full model number, 106.52582201

[Repair-man]

Your model has the Acceler-Ice feature, if I recall...a booster fan under the icemaker to enhance production.

None of this works if the water valve is not letting water to the icemaker. Here's a simple way to find out...take the white cover off the icemaker and insert an insulated jumper wire into the holes marked V and L. This supplies power to the water valve. If water enters when this jumper is in place, we know 2 things:

1. The icemaker is bad
2. The valve is OK

Of course, always check the obvious, a frozen up fill tube behind the icemker will create similar complaints.

[clshadid]

thanks for info you told me enough that I figured out I had a bad solenoid on water valve replaced it and its working great.
THANKS A BUNCH!!!!