control panel not responding drain pump running

[GITOBY]

Machine started off with an FH code, I checked all water inlets and now the pause cancel switch will not do anything.  I unplug the machine and when I plug it back in it lets out a short buzz and the the display just flashes 0.45 and the drain pump just keeps running?? Any suggestions??

Model 110.4586

[JWWebster]

Get the crapola out of the drain pump and retry

[laundryman]

if it is a kenmore he 3 4 or 5 fh usually means no water coming in on either the hot or cold side or the flow meter has gone bad. turn off the water faucet and remove the fill hoses from the back of the machine, check for rust or limescale buildup that could restrict flow. also make sure that you can get water from the faucet. good luck