Well, I replaced the clutch and the coupling. One of the old clutch pads had broken and turned sideways in the housing. Now it spins great. I have one problem, when the spin starts it is loud. Like a Scrapeing and squeecking noise. It sounds like the clutch is just slipping. the directions say "flange installed downward". If i did this then the brake cam driver would not go into the correct position. When the washer gets mobing the noise stops. The clutch came with the blue spring installed and 2 green springs. The directions said that i need to use the blue spring so i did not change it. Do i need to change it? It would be counter productive to put any grease near the clutch pads correct? Please help.