Washer not spinning fast enough?

[AlleyCat]

Hi! I'm new to this website so don't know if I'm posting this correctly. I, too, have the same problem with my washer, MAYTAG, Model # MAV7700AWW. I had a repairman here who tried to replace the belt. It still didn't spin fast and sometimes with a regular load, (I can only maybe wash 3 pairs of pants at a time), it wouldnt spinn at all. He said that it was the transmission and suggested that I just get a new washer. I dont know if thats necessary as otherwise, the machine works well. Any suggestions?

[Al Capone]

Hi,

I'm new to this website so don't know if I'm posting this correctly.

The correct way would have been to start a new topic.

Posting Basics - Starting a New Topic

Please do not ask your own question in a topic.
In other words, please don't hijack the topic and make it yours.
Start your own topic and reference the other topic related to your issue.

I went ahead and made your post into a new topic for you. 

Now we just need to wait for a technician to come along and help answer your questions.

[Repair-man]

You probably need a new thrust bearing kit underneath. It releases the brake so the unit will spin, especially under a load. Instructions are in the kit and no weird tools are needed to replace the parts. All done from underneath or sitting on the floor.

Part # 12002213 Thrust Bearing Kit, AP4009132

[AlleyCat]

I had the repairman replace the thrust bearing kit yet the washer is just not spinning to the speed that it needs to be. Since then, I have also had the water pump replaced. The repairman said that he replaced the belt a month or so ago but just replaced the belt that was on it rather than look up my model number to see what belt really should be used. I am wondering if that is the problem. The washer can't take a normal or heavy load; it just won't spin at all.
I have been washing just small loads and the washer spins slightly but never enough to get the water out of the clothes.

[Repair-man]

Maybe it is time for a new transmission.  35-6615

The belt that was installed should have been a 22003483.


MAYTAG AMANA 35-6615 Ht Transmission, AP4373431





Part # 22003483 Washer Drive Belt, AP4029079

[apprich]

I would tip the washer back, remove the belts, and turn the tranny pulley in the spin direction. Cam should rise and tranny will turn without a lot of effort. If not, the brakes are not releasing all the way and the thrust washers will need to be adjusted.
 If it turns freely, you probably have a bad clutch in the tranny.

[Repair-man]

If it turns freely, you probably have a bad clutch in the tranny.

Huh? You found a clutch in that transmission?

Two misconceptions:
1. The Atlantis has only one belt
2. The thrust bearing kit shown above  is the clutch.

The problem appears to be transmission related. Maytag changed this tranny to a hi-torque design in mid production. The new tranny is a faster, quieter product with less failures.

[apprich]

Ok, I stand corrected, am rather unfamiliar with the different Maytag washers.

[AlleyCat]

Repairman- Thank you for your help. How expensive is the tranny and how long does it take to replace it? I am wondering if its worth the expense or if I should just get a new one. The washer spins sporatically yet never as fast as it should. There are times that the washer fills, washes, empties, but doesn't spin. If I let it sit for a half hour or so and set it to spin, it may spin somewhat.

[AlleyCat]

Is the tranny easy enough for me to replace with no experience in doing this or should I just throw up the towel, (no pun intended), and go buy a new washer???

[RAH52]

In Canada Atlantis washers made before Jan .1 2006 had a 10 year warranty on the transmission (parts only ) .I have done a number of changeouts from earlier production that failed to the high torque tranny and wouldn't advise tackling the job if you have had no training or experience ..I find it a fair amount of work . Give me a direct drive whirlpool tranny to change any day , now that's a good system and easy to work on .

[Repair-man]

You'd spend over $250 in parts and tools, so it would likely not be practical for you to change the tranny.

Transmission for your model- click pic to view