Author Topic: Kenmore He 3T - water in wash basin + no power  (Read 1123 times)

Offline metcalfja

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 1
Kenmore He 3T - water in wash basin + no power
« on: January 04, 2009, 04:44:00 PM »
A strange thing has happened to my washer, washed a load, then 1 day later I notice there is water standing in the wash basin.  When I opened the door, I noticed that the dials do not light up.  The plug works, its getting power, what puzzles me is how the water got into the machine.  I live alone, no one else uses the machine, so I'm not sure how it would happen.  Has anyone experienced this?  I hope is just a breaker or fuse problem and nothing more serious.
Appreciate any info!

Model 110.44936200

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 357
Re: Kenmore He 3T - water in wash basin + no power
« Reply #1 on: January 14, 2009, 08:00:42 AM »
Might be a faulty water valve that is stuck open but water would flow contiuosly. Try setting to spin/drain to get the water out and see if it does it again.

 

Kenmore 90+ will not drain water after wash cycle

Started by sheriberri

Replies: 3
Views: 1928
Last post May 01, 2010, 10:36:26 AM
by sheriberri
Complicated Kenmore washer with ATC,warm water comes in when cold wash selected

Started by shillion

Replies: 8
Views: 3420
Last post February 19, 2012, 10:16:19 PM
by wildimaginations
Kenmore 90 Series washer: Cold water does not fill wash, but fills rinse

Started by purnell1

Replies: 4
Views: 1004
Last post December 02, 2013, 07:52:49 AM
by purnell1
lint on clothes at end of wash. kenmore washer top load

Started by KMZK

Replies: 3
Views: 3507
Last post March 11, 2008, 10:59:49 PM
by BrntToast
fisher & paykel GWL11us No Hot water in regular wash..

Started by krazytech

Replies: 1
Views: 1314
Last post September 10, 2011, 08:25:05 PM
by JWWebster
Kenmore Not Spinning To Drain Water Out

Started by lopcrm7

Replies: 28
Views: 7540
Last post May 30, 2009, 11:42:51 PM
by lopcrm7