Now that you have access to the motor, unplug the harness and verify the motor windings again while directly in front of the motor, not from the CCU harness. See if it still shows the same readings as before.
Don't know about you, but I'd be on my way out to my truck to fetch a new MCU. The motor is OK, just be sure the tiny wires on the connections to it are ok.
The last time I checked, Hawaii is still America, so shipping is a moot issue Follow this link to order the motor control, part # W10163007
Started by roxgirl
Started by AJ
Started by TechnicianBrian
Started by mdevera211
Started by jracmm
Started by gtrdave