Author Topic: KITCHEN AID ICE MAKER WON'T EJECT ICE  (Read 1217 times)

Offline MOORE2700

  • VIP Member
  • Member Since: Feb 2012
  • Posts: 3
KITCHEN AID ICE MAKER WON'T EJECT ICE
« on: February 21, 2012, 12:38:17 PM »
I HAVE A KITCHEN AID SIDE BY SIDE.  I HAVE REPLACED THE ICE MAKER UNIT TWICE.  WORKS FINE THEN STOPS EJECTING ICE.  RUN WATER THRU THE DOOR AND IT WILL EJECT ICE.  NOW IT WILL NOT WORK.  THE LIGHTS ON THE SIDE BLINK TWICE THEN PAUSE THEN BLINK TWICE WHETHER THE FLAP IS OPEN OR CLOSED. ANY HELP

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 953
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: KITCHEN AID ICE MAKER WON'T EJECT ICE
« Reply #1 on: February 21, 2012, 12:45:37 PM »
Can sent model number ,sounds like you have a bad control for the ice maker.

Sent from my MB865 using Tapatalk

Offline MOORE2700

  • VIP Member
  • Member Since: Feb 2012
  • Posts: 3
Re: KITCHEN AID ICE MAKER WON'T EJECT ICE
« Reply #2 on: February 21, 2012, 12:57:08 PM »
MODEL NUMBER #KSRG22FKWH17. SERIAL #ST0328845
THANKS.

Offline MOORE2700

  • VIP Member
  • Member Since: Feb 2012
  • Posts: 3
Re: KITCHEN AID ICE MAKER WON'T EJECT ICE
« Reply #3 on: February 21, 2012, 01:00:14 PM »
ALSO THE FLAP IS BROKE ON THE SIDE OF THE FREEZER. IT WILL STAY ON BUT NOT REAL GOOD.
I NEED TO REPLACE THIS FLAP.

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 953
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: KITCHEN AID ICE MAKER WON'T EJECT ICE
« Reply #4 on: February 21, 2012, 01:16:18 PM »
i believe part is called flipper  AP3037562, plus to repair icemaker you will need pc board kit AP3137510. :)
 
AP3137510 & AP3037562
« Last Edit: February 21, 2012, 01:28:31 PM by bigbuck »

 

KSRG25FKSS16 Kitchen Aid ice maker problem

Started by jam

Replies: 3
Views: 5136
Last post December 06, 2008, 09:49:26 PM
by JWWebster
Video: See if your Whirlpool Ice maker infrared optics control is working.

Started by AJ

Replies: 2
Views: 43525
Last post August 01, 2007, 12:21:37 PM
by AJ
ED27DQXB01 Do I need to replace the ice maker?

Started by galen

Replies: 5
Views: 3899
Last post August 27, 2007, 07:47:38 PM
by AJ
Video: Testing - Connect and disconnect a push-in ice maker water fill valve

Started by AJ

Replies: 0
Views: 17359
Last post July 30, 2007, 05:53:38 PM
by AJ
Video: Whirlpool In-Door Ice Maker Fill Cycle

Started by AJ

Replies: 3
Views: 9518
Last post September 23, 2008, 05:37:19 PM
by Al Capone
Video: How to make your Whirlpool ice maker run for testing and diagnostics

Started by AJ

Replies: 10
Views: 43522
Last post April 16, 2013, 10:40:23 PM
by charlenemhj