Author Topic: timer not working all the time  (Read 1667 times)

Offline sparky823

  • VIP Member
  • Member Since: Sep 2007
  • Posts: 132
timer not working all the time
« on: November 16, 2008, 01:32:36 AM »
Can you give me the part# for a timer for a Maytag A810 washer(26 years old).

Sometimes it will get to the spin part and just sit there. You can mess with it and get it to spin---takes a while sometimes. Then it may be ok for a few months before it does it again. Seems like one time it washed through the whole cycle (meaning agitated and never spun). This is a timer problem-right??

Thanks

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: timer not working all the time
« Reply #1 on: November 16, 2008, 04:34:39 AM »
Quote
This is a timer problem-right??


Right. The final increment on the end of the spin cycle is the most likely detente to sustain damage.

205640 is the part number





« Last Edit: November 16, 2008, 06:45:30 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline sparky823

  • VIP Member
  • Member Since: Sep 2007
  • Posts: 132
Re: timer not working all the time
« Reply #2 on: November 16, 2008, 01:58:13 PM »
Thanks for the info and the quick reply. I looked up the timer and there is one by Maytag and one by Whirlpool with Maytag being cheapest so since they are the same I will get the Maytag one.

Too bad things aren't still made this way. In 26 years all that has been changed is the water valve and that wasn't even the problem. After replacing that it kept overfilling and the line to the pressure switch was stopped up with gunk from the days of Fab detergent with fabric softener in it and too many cold washes.

This belongs to my brother and his wife. She went and bought a new Speed Queen so I told him instead of junking this one I wanted it to keep in case someone came along and needed one. IMO it is to good to throw away. It is working fine now but it has had the timer problem a couple of times and she wanted a new one before this one stopped again.

I wonder if the new SQ will last as long as the Maytag?????

Thanks again.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: timer not working all the time
« Reply #3 on: November 16, 2008, 02:11:11 PM »
... from the days of Fab detergent ...
you mean Duz Detergent doesn't have free dishes in the box anymore ?

Quote
... She went and bought a new Speed Queen ...
I wonder if the new SQ will last as long as the Maytag?????...
YES
After leaving this Earth, "Do you want the smoking or non-smoking section?"

donate
$1, $2, $5, $10, $20, $50
 

Frigidaire Top Load Washer Timer Stops At Same Spot Every Time

Started by grace1717

Replies: 31
Views: 6847
Last post May 04, 2013, 02:45:01 PM
by abzaatari
How do I access Kenmore Washer Timer. 11023034100?

Started by wsommariva

Replies: 7
Views: 12154
Last post September 02, 2007, 04:58:36 PM
by AJ
maytag washer- timer problem?

Started by inot66

Replies: 6
Views: 4883
Last post January 10, 2008, 08:47:16 PM
by inot66
Video: How to remove whirlpool washer timer.

Started by AJ

Replies: 1
Views: 3874
Last post April 26, 2009, 07:41:04 PM
by ShawnTRD
Whirlpool washer just stopped working

Started by mjrobs

Replies: 38
Views: 19437
Last post May 01, 2008, 06:08:42 PM
by AJ
MAYTAG NEPTUNE FRONT LOAD MAH6700AWW NOT WORKING FRUSTRATED

Started by stacy2

Replies: 4
Views: 6849
Last post June 15, 2008, 09:18:30 PM
by stacy2