Author Topic: Roper Oven  (Read 5757 times)

Offline CB

  • VIP Member
  • Member Since: Nov 2008
  • Posts: 1
Roper Oven
« on: November 15, 2008, 01:32:03 PM »
I have an old built in roper oven that i do not have an owners manual for and having herd time finding one.  But am desperate to know how to operate it for self cleaning function.  Really old model #2092B3A.  Anyone have that info on self cleaning or know where I can get an owners manual?

Thanks!

Model Number: 2092B3A icon

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Roper Oven
« Reply #1 on: November 16, 2008, 04:50:46 AM »

To operate the self-clean, set the oven controls to the Clean cycle then latch the door shut. Set the Start time on the clock for when you want to begin the clean cycle. Set the Stop time for 3 hours later. That's all there is to  it. If the oven does not respond, you have other issues.


Easy-Off has developed a new spray for self-cleaning ovens that eliminates the need to use the self-clean cycle. After all, it is common knowledge among us repair folks that the self=clean cycle is hard on an oven, and your pocketbook. Not only does it burn 3 hours of electricity, but also can damage electrical parts from the extreme heat (900+ o F.)  Even if you could make your oven work on this cycle, it may just be what kills it for sure :)

If it does not work, you may as well get Santa busy looking for a new oven, since very few parts are available for this  model other than heating elements.
« Last Edit: November 16, 2008, 06:38:39 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Roper Double Oven

Started by hatemyoven

Replies: 2
Views: 1856
Last post June 30, 2009, 08:44:17 PM
by JWWebster
Roper oven not locking in cleaning mode

Started by jayarmstrong1

Replies: 2
Views: 1177
Last post January 15, 2010, 05:33:13 PM
by jumptrout51
20" roper gas oven pilot

Started by schleven

Replies: 5
Views: 2868
Last post April 03, 2011, 08:10:26 AM
by jumptrout51
Roper Range / Stove / Oven Fault Codes

Started by AJ

Replies: 0
Views: 1738
Last post December 15, 2011, 01:40:54 PM
by AJ
Need help w/wiring oven control switch, Roper FEP310VQ

Started by mcnairent1

Replies: 1
Views: 770
Last post November 26, 2012, 08:47:08 PM
by AJ
Frigidaire oven temp sensor probe?

Started by jon

Replies: 1
Views: 6124
Last post July 08, 2007, 06:06:26 PM
by AJ