washer-dryer combo 220 conversion

[kimosabey01]

Hi !!  I am trying to convert a washer dryer combo from 220 volt to 110 volt
I know the dryer will need a 110 volt heating element but i dont know about
the wiring is it possible to do this???  

Model 110.88752796

[JWWebster]

You could try and find a restring kit for a compact dryer. Good luck on that one.

[tgoods]

Sure it's possible but I wouldn't do it.  110 volt dryers suck.  You'll need two different 110 circuits if you want to run the washer and dryer at the same time.  If you're running another 110 circuit, you might as well just run a 220 volt circuit.  If I haven't changed your mind here's the schematic.

[kimosabey01]

Hi !!Thanks for your Info but I made 2 circuits, black wire and white to Dryer and red and white to washer and linked green to Body, changed the heating element to a 110 volt and they
Work but cant get Heat on the dryer at all any ideas???

[JWWebster]

Ok now both dudes need to be on their own dedicated line. Try running the dryer on a dedicated circuit.

[tgoods]

Connect your neutral to line 2 and you should have heat.  If you are going to use automatic cycles, you need to bypass the drop down resistor.