Author Topic: kenmore HE2 installing a new bellow  (Read 2082 times)

Offline chrissymustang

  • VIP Member
  • Member Since: Nov 2008
  • Posts: 6
kenmore HE2 installing a new bellow
« on: November 09, 2008, 12:01:03 AM »
My HE2 is approx 1 yr old and got a tear in the bellow causing water to leak out from under the door.  I have removed the old bellow but I'm having trouble getting the new one in.  Cant seem to figure out the trick to fit it and also the inner ring clamp.  Any help out there?
keith

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline chrissymustang

  • VIP Member
  • Member Since: Nov 2008
  • Posts: 6
Re: installing a new bellow
« Reply #2 on: November 09, 2008, 11:48:41 PM »
thanks, 

finally got it on.  Instead of clamps, asked my wife to help.  After getting the bellow on, we fed the clamp on, starting at the  9 oclock position and ended up at the 3 oclock position with the screw.  We were able to use some leverage on the screw to get the rest of the clamp on.  Ran the washer no leaks. 

thanks
 ;D

 

Kenmore 80 series issues after installing coupler

Started by punkncat

Replies: 10
Views: 3661
Last post October 07, 2009, 09:59:36 PM
by JWWebster
Kenmore Elite Top of the Line quit spinning

Started by Bishop

Replies: 11
Views: 7810
Last post September 06, 2007, 05:24:55 PM
by AJ
How do I access Kenmore Washer Timer. 11023034100?

Started by wsommariva

Replies: 7
Views: 12367
Last post September 02, 2007, 04:58:36 PM
by AJ
Video: Why My Kenmore Washer Died

Started by AJ

Replies: 6
Views: 4302
Last post March 05, 2008, 07:06:51 PM
by AJ
Kenmore (frigidaire?) washer 417.29042991 No Spin - drains fine

Started by ratt2581

Replies: 1
Views: 6216
Last post September 21, 2007, 09:44:54 PM
by AJ
kenmore washer wont spin

Started by futch13

Replies: 5
Views: 4211
Last post October 09, 2007, 12:28:49 PM
by rickgburton