I have a Kenmore Elite HE3 Washing Machine that is about 3 1/2 years old. It started flashing an F11 code and a Fdu code about a month and a half ago and we were advised to change out the door lock and if that didn't work to change out the Motor Control Unit. We changed the door lock and it worked fine for a few weeks then we got the F11 code again so we changed out the MCU and it has worked ok for a week and a half or so and then yesterday it gave me the F11 code again. If I opened it up and played with a few wires on the MCU it would start back up and finish the cycle. Then my husband unplugged and replugged a couple of the wires back in and it worded fine for three loads and then the fourth load it gave me the code again, which I was able to override by opening it up again and playing with the wire again. We are needless to say frustrated and not sure what we should do next. We really don't want to spend anymore money on it so we are hoping it is an easy fix. Any help will be greatly appreciated.