Author Topic: Kenmore Electric Range-No Bake or Broil  (Read 5745 times)

Offline Gobbyparts

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 5
Kenmore Electric Range-No Bake or Broil
« on: February 23, 2009, 02:22:05 PM »
Hey everyone, My stove stopped working the other day and I think I've narrowed the problem down to the Electronic Oven Control but I wanna get everyone's input considering I've never messed with Electric Stoves or any appliances for that matter. And also, the part is pretty expensive to replace. I'll list the steps that I took to narrow the problem down to the Control/Clock Panel

1. Flipped breakers several times
2. I then checked the Ohms in the heating element and got a reading
   of 20 I think
3.Next, I checked the voltage of each side of the heating element,
   the right side got all 120 volts but the left side didn't
4.The left side of the heating element is supposed to get its power
   from the L2 out connection on the Control Panel. L2 In had all the
   120 volts so I think something is wrong with the circuit not
   transferring the power from the L2 In to the L2 Out.

I'm not sure if there could be anything else wrong so please, any input would be much appreciated!

Thanks
Bobby

Model 790.95032503
« Last Edit: February 23, 2009, 03:27:45 PM by Al Capone »

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Kenmore Electric Range-No Bake or Broil
« Reply #1 on: February 23, 2009, 02:41:44 PM »
depending on the last (4) missing numbers of your model number ...

It would seem like the DLB Relay on the Controller is bad.

Could be replaced if you could find the replacement (part numbers from the Relay) and could solder the new one onto the board.



After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline Gobbyparts

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 5
Re: Kenmore Electric Range-No Bake or Broil
« Reply #2 on: February 23, 2009, 02:58:11 PM »
What does the DLB relay look like? I'm attaching a picture of the replacement part for the control panel. Is it anything on the back of it?
Also, I'm not really sure what the other 4 numbers for the model number are. I wasn't aware there were anymore.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Kenmore Electric Range-No Bake or Broil
« Reply #3 on: February 23, 2009, 03:08:16 PM »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline Gobbyparts

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 5
Re: Kenmore Electric Range-No Bake or Broil
« Reply #4 on: February 23, 2009, 03:25:11 PM »
Finally found the last 4 numbers, 2503, so all together the model number is 79095032503. Hope that helps!

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Re: Kenmore Electric Range-No Bake or Broil
« Reply #5 on: February 23, 2009, 03:28:09 PM »
I updated the topic to include the full model number, thanks.
RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Kenmore Electric Range-No Bake or Broil
« Reply #6 on: February 23, 2009, 03:33:40 PM »


790.95032503 Wiring Diagram

It seems the DLB Relay is the one in the center of the board...
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline Gobbyparts

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 5
Re: Kenmore Electric Range-No Bake or Broil
« Reply #7 on: February 23, 2009, 03:41:24 PM »
Yes of course, why didn't I think to look at the wiring diagram...Only problem is, my controller looks just a little diff from the wiring diagram, it actually looks exactly like the pic I posted earlier. I assume the DLB relay would then be the white block on the far left?

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Kenmore Electric Range-No Bake or Broil
« Reply #8 on: February 23, 2009, 04:36:03 PM »
I'm not sure..... you'd have to trace the L2 OUT to see which Relay it goes to ...
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline Gobbyparts

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 5
Re: Kenmore Electric Range-No Bake or Broil
« Reply #9 on: February 23, 2009, 04:45:57 PM »
I'm having a hard time getting the controller out of the whole timer/display box...thing lol...told you, I've never dealt with appliances before really. Any suggestions to get the thing apart? Oh, and btw, thanks for all your help so far!

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Kenmore Electric Range-No Bake or Broil
« Reply #10 on: February 23, 2009, 04:56:02 PM »
I don't know if this will help

790.95032503 Parts Diagram
After leaving this Earth, "Do you want the smoking or non-smoking section?"

 

Tappan Electric Range No Bake No Broil

Started by cbmcd2680

Replies: 1
Views: 1335
Last post November 09, 2011, 07:05:52 PM
by theoldstoveguy
Whirlpool Electric Range - Bake Cycle Not Working

Started by AJ

Replies: 0
Views: 2676
Last post January 01, 2008, 03:44:30 PM
by AJ
Frigidaire Range no Bake or Broil

Started by TechnicianBrian

Replies: 0
Views: 2383
Last post May 13, 2008, 09:48:19 PM
by TechnicianBrian
Hotpoint Range no Bake or Broil

Started by TechnicianBrian

Replies: 0
Views: 1688
Last post May 18, 2008, 07:42:18 AM
by TechnicianBrian
Maytag PGR5710BDQ Gas Range, Flashing lock light when bake or broil is pressed

Started by straycatt

Replies: 4
Views: 4784
Last post June 14, 2008, 11:19:00 AM
by straycatt
Whirlpool electric range hidden bake element

Started by Jerry

Replies: 2
Views: 4127
Last post December 01, 2008, 07:14:22 PM
by AJ