Author Topic: Maytag Pump Pully  (Read 1518 times)

Offline a3kbrisk

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 1
Maytag Pump Pully
« on: October 31, 2008, 10:46:35 AM »
My washer stopped spinning. I looked under the unit and the belt was in tact, but was off. The unit has a three pulley system with one belt.  However, the pulley under the Pump was completely gone, there was a round melted plastic piece under the unit. Do I have to replace the whole pump? Is this a bigger problem than meets the eye? The machine is 3 years old. I also cant get the front cover off, no screws, just 2 clips under front cover. No manual online.

Model MAV3955EWW

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Maytag PumpPully
« Reply #1 on: October 31, 2008, 11:59:53 AM »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

 

How to replace a Maytag - Amana washer water pump and belt.

Started by AJ

Replies: 18
Views: 30044
Last post April 19, 2010, 08:23:29 PM
by JWWebster
Maytag Pump and Belt

Started by Chip11

Replies: 2
Views: 1410
Last post October 28, 2008, 11:19:15 PM
by JWWebster
27001233 Maytag Amana Washer Water Pump

Started by AJ

Replies: 0
Views: 5697
Last post April 05, 2009, 05:34:31 PM
by AJ
12112425 Maytag Washer Pump and Drive Belts

Started by AJ

Replies: 0
Views: 2000
Last post April 05, 2009, 10:32:44 PM
by AJ
34001098 Maytag Washer Water Pump

Started by AJ

Replies: 0
Views: 2704
Last post April 09, 2009, 12:22:07 AM
by AJ
6-2022030 Maytag Amana Washer Water Drain Pump

Started by AJ

Replies: 0
Views: 4220
Last post May 09, 2009, 03:02:28 PM
by AJ