Author Topic: timer starts but microwave doesn't  (Read 3847 times)

Offline Juanito

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 2
timer starts but microwave doesn't
« on: October 31, 2008, 08:16:42 AM »
The timer can be set and when you press start button, the timer starts but the microwave doesn't.  Hope somsone can help with this problem.

Model FMV156DCG or APYDMR0160

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: timer starts but microwave doesn't
« Reply #1 on: October 31, 2008, 11:43:09 AM »
Does the Oven Light, TurnTable, Fan, work ?
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline Juanito

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 2
Re: timer starts but microwave doesn't
« Reply #2 on: October 31, 2008, 12:56:18 PM »
ONLY THE LIGHT AND TIMER WORK

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: timer starts but microwave doesn't
« Reply #3 on: October 31, 2008, 01:29:57 PM »
soumds like a bad Primary Interlock (Door) Switch  5304440026
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Follow us on Google+
 

Kenmore Elite Microwave keypad doesn't work

Started by sherm54

Replies: 1
Views: 4777
Last post September 27, 2008, 08:49:16 PM
by whirlpooltech
Frigidaire Microwave Counts Down but Doesn't Heat.

Started by TechnicianBrian

Replies: 0
Views: 12027
Last post December 22, 2008, 03:54:23 PM
by TechnicianBrian
Amana Microwave Noisy and No Heat-

Started by mkbabi

Replies: 4
Views: 3606
Last post January 13, 2008, 09:34:14 AM
by Skeeter
Frigidare LEVM30FE Microwave E21 code

Started by Earl Dryer

Replies: 6
Views: 2660
Last post September 27, 2011, 04:48:24 PM
by rego
Jenn-Air Microwave Not Heating

Started by TechnicianBrian

Replies: 0
Views: 2305
Last post March 20, 2008, 07:50:14 PM
by TechnicianBrian
Sharp Microwave Not Heating

Started by TechnicianBrian

Replies: 0
Views: 4840
Last post March 29, 2008, 05:33:22 PM
by TechnicianBrian