Author Topic: Frigidaire Dishwasher wont run normal cycle  (Read 3512 times)

Offline t-bone

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 1
Frigidaire Dishwasher wont run normal cycle
« on: October 22, 2008, 09:11:29 PM »
My Frigidaire Dishwasher (Model MDB212RBS0) wont run the normal cycle properly.  It starts making noise, like it is filling for a a minute or so. . . and then nothing.  The Pots and Pans cycle seems to work fine.  Is this the timer?  Could it be something else?  Would like to be sure before I spend the $115.0  to replace it. . ..

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Frigidaire Dishwasher wont run normal cycle
« Reply #1 on: October 23, 2008, 06:58:19 AM »
It could be the selctor switch instead of the timer. You'll have to do some reading  in the Service Manual before you can answer that question for yourself. If you own a  volt/ohm meter, this will be a quick study.


Frigidaire Dishwasher Manual  (9 MB)
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Whirlpool QuietPartner II Dishwasher will not drain on normal cycle?

Started by super20g

Replies: 0
Views: 2304
Last post May 19, 2009, 09:05:32 AM
by super20g
Frigidaire Dishwasher won't start (lights cycle but no water/motor)

Started by mama

Replies: 3
Views: 20177
Last post July 16, 2009, 12:00:17 AM
by BrntToast
Frigidaire dishwasher does not start dry cycle (FDB61RJS0)

Started by smenago

Replies: 1
Views: 2000
Last post March 05, 2013, 08:38:10 PM
by LowSL2
Frigidaire Gallery Dishwasher flys through each cycle!

Started by frigidairefried

Replies: 1
Views: 1719
Last post June 25, 2014, 08:35:55 AM
by LowSL2
Dishwasher does not stop running for Normal cycle

Started by skamath0822

Replies: 0
Views: 121
Last post November 11, 2014, 09:01:07 AM
by skamath0822
Frigidaire Dishwasher - Does not fill with water.

Started by AJ

Replies: 0
Views: 5732
Last post January 15, 2008, 06:32:02 PM
by AJ