Author Topic: Won't advance into spin cycle without opening the lid  (Read 6024 times)

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Won't advance into spin cycle without opening the lid
« Reply #10 on: October 13, 2008, 05:25:08 PM »
Quote
so you could stop getting punched in the face by your smart alleck comments

Maybe it's from having to justify my diagnosis to those who have no clue.


Sorry if you can't take a Christian's effort to help you thru your problem. If your idea of solving attitude issues is by punching, then you might need some attitude adjustment yourself. I'll be glad to give you my address if you think you want to provide me with some enlightenment, Grasshopper.

Realistically speaking, I can't see how myself or any other "joe" could provide enough credentials on a forum like this, so you have to weight the advice as it is given. Lord knows you will get  lots of different 'opinions' on what the problem could be. Since this is not even MY forum, I am sticking my neck out here to offer you advice, therfore I cross all my T's and dot my I's.
« Last Edit: October 13, 2008, 05:38:15 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline big t

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 12
Re: Won't advance into spin cycle without opening the lid
« Reply #11 on: October 13, 2008, 05:29:02 PM »
Maybe it's from having to justify my diagnosis to those who have no clue.

Sorry if you can't take a Christian's effort to help you thru your problem.

No no I thank you for your diagnosis christian friend!  I will take your diagnosis and put it to good use so I can prove that other dude wrong.  Thanks again my brothu!

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Won't advance into spin cycle without opening the lid
« Reply #12 on: October 13, 2008, 05:36:59 PM »
What about that drive coupling? sounds to me like it is broken.
http://sites.google.com/site/sublimeappliancerepair/washer-will-not-spin
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Won't advance into spin cycle without opening the lid
« Reply #13 on: October 13, 2008, 05:39:06 PM »
See, it doesn't take long...
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline big t

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 12
Re: Won't advance into spin cycle without opening the lid
« Reply #14 on: October 13, 2008, 05:42:35 PM »
I think repair-man gave a pretty good explanation to the problem, why do you think it's a bad coupler?

Offline big t

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 12
Re: Won't advance into spin cycle without opening the lid
« Reply #15 on: October 13, 2008, 05:50:45 PM »
Quote
so you could stop getting punched in the face by your smart alleck comments

Maybe it's from having to justify my diagnosis to those who have no clue.


Sorry if you can't take a Christian's effort to help you thru your problem. If your idea of solving attitude issues is by punching, then you might need some attitude adjustment yourself. I'll be glad to give you my address if you think you want to provide me with some enlightenment, Grasshopper.

Realistically speaking, I can't see how myself or any other "joe" could provide enough credentials on a forum like this, so you have to weight the advice as it is given. Lord knows you will get  lots of different 'opinions' on what the problem could be. Since this is not even MY forum, I am sticking my neck out here to offer you advice, therfore I cross all my T's and dot my I's.

So just out of curiosity, why do you stick your neck out to offer advice if it's not your forum?  Do you get paid for your karma points?  Does the forum pay you somehow?

How does this forum validate credentials?  what is your incentive for offering help?

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Won't advance into spin cycle without opening the lid
« Reply #16 on: October 13, 2008, 05:55:00 PM »

Quote
Do you get paid for your karma points?

No, in fact I was thinking about charging for them...what do you think is a fair price ?:)


The only compensation I ever get from helping out here is if by some small chance someone clicks on that little beer symbol over there on the left. And I gotta admit, I would have starved long ago if that was all I relied on, cause most folks take the advice and run off to save that $100 with out so much as an afterthought. Glad I have a day job.

Do I sound cynical?
« Last Edit: October 14, 2008, 05:21:13 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Won't advance into spin cycle without opening the lid
« Reply #17 on: October 13, 2008, 05:55:50 PM »
Hey Big T did you get my memo? Broken drive coupling is what I suspect.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Won't advance into spin cycle without opening the lid
« Reply #18 on: October 13, 2008, 05:59:07 PM »
I think the gentlemen answered your suggestion already, O Sublime One.

Quote
I think repair-man gave a pretty good explanation to the problem, why do you think it's a bad coupler?

You might want to substantiate your comment now, Your Flatulence.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline big t

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 12
Re: Won't advance into spin cycle without opening the lid
« Reply #19 on: October 13, 2008, 06:00:44 PM »
Hey Big T did you get my memo? Broken drive coupling is what I suspect.

Yes and I said what was your reasoning? 

 

Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 3712
Last post December 25, 2007, 09:41:02 PM
by AJ
Kenmore frontloader 417.42142100 shaking when in spin cycle

Started by candoan

Replies: 3
Views: 4466
Last post January 28, 2008, 06:04:40 AM
by candoan
washer works except spin cycle and has a burning rubber smell.

Started by hogslayer

Replies: 4
Views: 5184
Last post February 19, 2008, 03:50:55 PM
by JWWebster
Maytag Spin Cycle

Started by Camarocam

Replies: 1
Views: 4191
Last post February 19, 2008, 11:07:58 AM
by AJ
Atlantis squeak on end of spin cycle

Started by sdjjwilliams

Replies: 5
Views: 2989
Last post February 21, 2008, 11:14:11 AM
by sdjjwilliams
Maytag washer-- got agitation, no spin in spin cycle

Started by PB3

Replies: 13
Views: 13464
Last post March 28, 2008, 09:18:30 AM
by PB3