Thanks for the tech sheet.
Everything appears to work on this unit. It runs normally for a couple of cycles and then won't restart unless you unplug and reconnect the power. When I run the diagnostics I get a P for thermistor on Test 1. The unit was warm so I didn't look deeper into the defrost heater/bimetal on Test 2. The evaporator fan doesn't start on Test 3 and the compressor and condenser fan doesn't start on Test 4. Is there a long delay on start or do I have a problem with the User Interface or maybe some other problem? I have another customer with a similar unit having similar problems. Thanks, Joey.