Author Topic: Bellows Retaining Wire  (Read 1418 times)

Offline mf18nh

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 4
Bellows Retaining Wire
« on: October 10, 2008, 04:27:53 PM »
I put a new door lock in my duet.  But am having trouble getting the retaining wire, that goes around the edge of the bellows and creates the door seal, back in place I only took 1/2 of the rubber off and the part that was in place has a nice tight seal.  But the rest of it,  I just cannot put back.  Is there a lubricant or something I should be putting on.  Have been using bicycle tire tools to try to slide the retaining wire in place.

Model Number: ghw9100l icon

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Bellows Retaining Wire
« Reply #1 on: October 10, 2008, 04:51:48 PM »
I use liquid Dawn or any laundry detergent around the perimeter of the boot to slide the wire along. You have to have 4 pair of hands sometimes to hold one side down :)

Be sure to put the rubber boot on all the way before sliding the wire on. The part of the wire which has the spring attached should be the last section to go on at the bottom. I usually start at the 7:00 position and work my way clockwise to the 6:00.
« Last Edit: October 10, 2008, 06:23:02 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline mf18nh

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 4
Re: Bellows Retaining Wire
« Reply #2 on: October 11, 2008, 10:04:47 AM »
Soap liquid worked perfect.  Thanks

 

He 3 bellows

Started by chic

Replies: 3
Views: 2054
Last post November 09, 2008, 05:56:57 AM
by Repair-man
Maytag washer grinding/wire dragging on metal noise but inner tub won't come out

Started by markq

Replies: 2
Views: 3481
Last post February 20, 2009, 10:40:39 AM
by markq
little green wire on my washer

Started by jomercer

Replies: 3
Views: 1646
Last post July 31, 2009, 02:25:36 PM
by evo100
Front loader bellows

Started by dstrang1

Replies: 1
Views: 1118
Last post December 12, 2010, 11:33:36 PM
by ryan111
installation of front bellows spring

Started by Washaman

Replies: 8
Views: 2676
Last post June 06, 2011, 07:52:13 PM
by Washaman
Getting Front Loader Bellows/Boot Properly Reinstalled for the non-technician

Started by Bootman

Replies: 1
Views: 746
Last post September 09, 2011, 09:02:29 AM
by JWWebster