« previous next »
Pages: [1]   Go Down

Author Topic: Whirpool Duet HT Conflict  (Read 4537 times)

Offline John M

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 4
Whirpool Duet HT Conflict
« on: October 06, 2008, 05:01:29 PM »
Front loader, starts off fine, after the 5th or 6th "fill" cycle, (It accually doesnt fill all the way up), the water continues to run until the machine is slighly over half full or water. then I get an F 20 code, which if I read right is a low water pressure problem, or something to that effect, and if I understand right. Was told it goes into that mode since its sensing a longer than normal "fill" time, but whats the cause of the overfilling? I have a tech coming Wednesday, but is there anything I can check before he gets here that might save me a few heartaches? It has worked fine since I bought it. Thanks!

Model Number: WFW9200SQA12 icon
Logged


Offline John M

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 4
Re: Whirpool Duet HT Conflict
« Reply #1 on: October 06, 2008, 06:14:15 PM »
Sorry, model should be WFW9200SQA12, not WED.
Logged

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3019
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Whirpool Duet HT Conflict
« Reply #2 on: October 06, 2008, 07:00:19 PM »

If you have a tech coming, there's really nothing you can do except maybe check your pump area under the lower panel for stuff in the filter..
« Last Edit: October 06, 2008, 07:03:34 PM by Repair-man »
Logged
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Re: Whirpool Duet HT Conflict
« Reply #3 on: October 06, 2008, 07:05:10 PM »
Model number corrected in first post.
Logged
RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1378
  • Country: us
Re: Whirpool Duet HT Conflict
« Reply #4 on: October 07, 2008, 01:07:38 PM »
from WFW9200SQA12 Tech Sheets

F20

Verify that the pressure switch hose is in good condition and properly connected to tub and pressure switch.

1.Unplug washer or disconnect power.

3.Verify wire harness connections to ... pressure switch, flow meter, and Central Control Unit (CCU).

....

5.Plug in washer or reconnect power.

6.Verify pressure switch operation.

7.Verify flow meter operation by blowing air through the part and measuring the resistance.

8.Verify CCU operation by running a Diagnostic test or any cycle.
Logged
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8640
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirpool Duet HT Conflict
« Reply #5 on: October 07, 2008, 04:32:56 PM »
In other words, take the hose off the water pressure switch and blow the trash out of it. Put it back snug,pump the water out, and retry.
Logged
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline John M

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 4
Re: Whirpool Duet HT Conflict
« Reply #6 on: October 14, 2008, 06:37:20 PM »
Quote from: JWWebster on October 07, 2008, 04:32:56 PM
In other words, take the hose off the water pressure switch and blow the trash out of it. Put it back snug,pump the water out, and retry.

Wheres it located? Waiting on parts......
Logged

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1378
  • Country: us
Re: Whirpool Duet HT Conflict
« Reply #7 on: October 14, 2008, 09:32:59 PM »
Pressure Switch #15 on right side of Cabinet
Logged
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8640
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirpool Duet HT Conflict
« Reply #8 on: October 14, 2008, 10:11:39 PM »
Reggie would it be possible that trash got in the tube going up to that pressure switch and caused the error display?
Logged
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8640
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirpool Duet HT Conflict
« Reply #9 on: October 14, 2008, 10:13:08 PM »
Why order parts when you can just clear the line?
Logged
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline John M

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 4
Re: Whirpool Duet HT Conflict
« Reply #10 on: October 15, 2008, 04:37:26 PM »
Quote from: JWWebster on October 14, 2008, 10:13:08 PM
Why order parts when you can just clear the line?

A&E didthe parts, sick and tired of their run around about putting them in. Been a long day!
Logged

Pages: [1]   Go Up
« previous next »
 

whirpool duet washer WFW9200sq02 manual

Started by apu

 Replies: 0
Views: 864 		Last post October 10, 2011, 12:15:50 PM
by apu
Whirpool Duet GHW9250ML1 - won't drain

Started by adbrick

 Replies: 14
Views: 1121 		Last post May 03, 2012, 09:36:18 PM
by adbrick
Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!

Started by AJ

 Replies: 20
Views: 24446 		Last post March 15, 2011, 11:17:17 PM
by JWWebster
Video: Whirlpool Duet Front Load Washer Water Pump Clean Out.

Started by AJ

 Replies: 0
Views: 3529 		Last post November 28, 2007, 09:58:47 PM
by AJ
How to replace a Whirlpool Duet washer bellow tub door seal

Started by AJ

 Replies: 35
Views: 55275 		Last post February 03, 2012, 09:02:19 PM
by bigbuck
Lost Ring Whirpool Unltimate Care II

Started by MIKEJOED

 Replies: 5
Views: 3461 		Last post March 05, 2008, 10:39:32 PM
by JWWebster