Author Topic: Unbalanced Whirlpool  (Read 4140 times)

Offline qbunnie

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 9
Re: Unbalanced Whirlpool
« Reply #10 on: October 15, 2008, 12:41:00 PM »
Thanks for all the help.  Other things just got a little busy, so this is going to take me a few days to work on.  I'll keep you updated.
Also, this forum is awesome.

Offline qbunnie

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 9
Re: Unbalanced Whirlpool
« Reply #11 on: October 15, 2008, 01:10:11 PM »
OK, checked the rear legs again.  The spring, both pins, and both link bars seem to be all okay. I set a shim under one leg, and that leg compressed more than the other, so I think they are working allright.

Offline qbunnie

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 9
Re: Unbalanced Whirlpool
« Reply #12 on: October 15, 2008, 01:25:03 PM »
So what are the chances that I don't have any pads at all? It looks almost like they have been removed...  I'll try to take some pics to show you, but the tubs still on, so its a hard angle.  Let me know what you think.
Thanks again.

Offline qbunnie

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 9
Re: Unbalanced Whirlpool
« Reply #13 on: October 15, 2008, 02:02:08 PM »
OK, here are the pics.  Looks like just metal on metal, no?

Offline qbunnie

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 9
Re: Unbalanced Whirlpool
« Reply #14 on: October 15, 2008, 03:03:27 PM »
Finally, I tilted the balance ring around, and there is still fluid in it.  Is that sufficient?  If not, what should I do to make sure the balance ring is good?

 

Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 29586
Last post January 02, 2009, 01:09:38 PM
by AJ
Whirlpool electronic error code

Started by roxgirl

Replies: 1
Views: 6014
Last post July 25, 2007, 08:15:36 PM
by AJ
Video: Whirlpool Washer Motor - Bad connection..

Started by AJ

Replies: 3
Views: 3473
Last post July 29, 2013, 06:32:05 PM
by AJ
Video: Whirlpool Made Direct Drive Washer Motor Coupler Replacement

Started by AJ

Replies: 18
Views: 44093
Last post May 18, 2010, 06:53:50 AM
by gimpyjones
Video: How To Replace a Water Pump On A Whirlpool Made Direct Drive Washer

Started by AJ

Replies: 0
Views: 9198
Last post August 10, 2007, 08:42:54 PM
by AJ
whirlpool belt drive washer won't spin

Started by mthd60sprty

Replies: 7
Views: 7858
Last post June 06, 2013, 08:42:12 AM
by fairbank56